MOUNTING BOLTS NOTES: (BY OTHERS) ly 1. HOLD ROUGH-IN DIMENSIONS +1/8" (3.2mm). 2 WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL \ 'CODES SHOULD BE ADHERED TO FOR INSTALLATION DIMENSIONS {LOCATIONS), WASTE AND SUPPLY REQUIREMENTS d OTHER THAN SHOWN. [3] INSTALLER MUST PROVIDE TRAP FOR PROPER INSTALLATION. o8] [2] REMOVE VALVE FROM PUSH BUTTON TO INSTALL WASTE 4 N 16 ELBOW ONTO BOWL. AFTER WASTE ELBOW |8 INSTALLED, 3 [47] REINSTALL VALVE AND ADJUST FLOW.
