Specification Sheet

model 1001HPS
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button valve
assembly which allows for front access stream adjustment
as well as cartridge and strainer access, this fountain offers
the ultimate in ease of maintenance.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
CONSTRUCTION
18 gauge Type 304 Stainless Steel fountain with attractive
and functional swirl bowl design, along with a
vandal-resistant bottom plate provides a long lasting unit
with added peace of mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
laminar flow prevents splashing and provides a superior
flow pattern. The integral basin shank and inserted roll pin
adds vandal resistance strength to the design, and the
shielded angled stream orifice produces a steady sanitary
source of water.
MOUNTING
3/16" steel mounting plate with supplied mounting
hardware provides a solid unit base and allows for easy
installation to a framed wall. (P-trap and stop require rear
access)
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Support Carrier: Model 6800 universal in-wall mounting
support for use with most fountains.
Chiller: Model HCR8, 8 gph remote water chiller provides
instantaneous cooling to meet a continuous demand for
chilled water.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1001HPS wall mounted barrier-free drinking fountain
shall include an 18 gauge Type 304 high-polished stainless
steel finish basin with integral swirl design, 14 gauge Type 304
high-polished stainless steel wall bracket, push-button
operated valve with front-accessible cartridge and flow
adjustment, polished chrome-plated brass vandal-resistant
bubbler head with integral laminar anti-squirt flow,
chrome-plated brass vandal-resistant waste strainer,
vandal-resistant bottom plate, and 1-1/4" O.D. waste pipe.
(P-trap and stop require rear access)
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1001HPS is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. This series
is precisely mounted, making it a nice addition to any
surrounding. Beautiful high-polished finish helps to maintain
the fountains overall appeal so it always remains looking as
new as it did when it was installed. Specifically, this type of
wall mounted drinking fountain may be placed in settings
such as: schools and other locations in and around office
buildings where the temperature remains above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.