Specification Sheet

1001MS
Wall Mounted Drinking Fountain
Quality Control
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced installation time
and added peace of mind.
Push Button
With its patented (Pat.# 6,981,692) push-button valve assembly
which allows for front access stream adjustment as well as
cartridge and strainer access, this fountain offers the ultimate in
ease of maintenance.
Construction
18 gauge Type 304 Stainless Steel fountain with attractive and
functional swirl bowl design, along with a vandal-resistant
bottom plate provides a long lasting unit with added peace of
mind.
Bubbler Head
Polished chrome-plated brass bubbler head with integral laminar
flow prevents splashing and provides a superior flow pattern.
The integral basin shank and inserted roll pin adds vandal
resistance strength to the design, and the shielded angled
stream orifice produces a steady sanitary source of water.
Mounting
Galvanized frame and 10 gauge surface plate provide the
maximum mounting strength for the single bubbler MS style
Haws drinking fountains.
Finish
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
FEATURES & BENEFITS
o
Bubbler Head: Model 5725 EnviroGard™ bubbler is a polished
chrome-plated solid brass bubbler head with stainless steel
water activated pop up canopy. (Pat.# 7,025,282)
o
Filter: Model 6426, 12" x 2", in-line lead removal element that
reduces lead from incoming water supply.
o
Chiller: Model HCR8, chiller provides for instantaneous cooling
to meet a continuous demand for chilled water.
o
Premier Finishes: Haws standard satin or high polished finishes
in stainless steel can be modified to have rose or gold Physical
Vapor Deposition (PVD) finish. Specify model with finish by
name.
OPTIONS
Model 1001MS wall mounted barrier-free drinking fountain shall
include an 18 gauge Type 304 Stainless Steel satin finish basin
with integral swirl design, stainless steel satin finish back and
access panel allowing for front access of P-trap and stop, in-wall
mounting frame, push-button operated valve with front-accessible
cartridge and flow adjustment, polished chrome-plated brass
vandal-resistant bubbler head with integral laminar anti-squirt flow,
chrome-plated brass vandal-resistant waste strainer,
vandal-resistant bottom plate, and 1-1/4" O.D. waste pipe.
SPECIFICATIONS
Perfect for either public or private indoor/outdoor settings, Model
1001MS is a great fit in areas where aesthetics are important to the
overall appeal of the architecture. This series is precisely mounted,
making it a nice addition to any surrounding. Beautiful satin finish
helps to maintain the fountains overall appeal so it always remains
looking as new as it did when it was installed. Specifically, this
type of wall mounted drinking fountain may be placed in settings
such as: schools and other locations in and around office buildings
where the temperature remains above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and electric
drinking fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65, and
the Federal Safe Drinking Water Act.
APPLICATIONS
1455 Kleppe Lane | Sparks, NV 89431 | [p] 775.359.4712 | [f] 775.359.7424 | [e] [e-mail] | www.hawsco.com | 9 April, 2009
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.