Specification Sheet

model 1001MS
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button valve
assembly which allows for front access stream adjustment
as well as cartridge and strainer access, this fountain offers
the ultimate in ease of maintenance.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
CONSTRUCTION
18 gauge Type 304 Stainless Steel fountain with attractive
and functional swirl bowl design, along with a
vandal-resistant bottom plate provides a long lasting unit
with added peace of mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
laminar flow prevents splashing and provides a superior
flow pattern. The integral basin shank and inserted roll pin
adds vandal resistance strength to the design, and the
shielded angled stream orifice produces a steady sanitary
source of water.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
MOUNTING
Galvanized frame and 10 gauge surface plate provide the
maximum mounting strength for the single bubbler MS style
Haws drinking fountains.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Chiller: Model HCR8, 8 gph remote water chiller provides
instantaneous cooling to meet a continuous demand for
chilled water.
Premier Finishes: Haws standard satin or high polished
finishes in stainless steel can be modified to have rose or
gold Physical Vapor Deposition (PVD) finish. Specify model
with finish by name.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1001MS wall mounted barrier-free drinking fountain
shall include an 18 gauge Type 304 Stainless Steel satin finish
basin with integral swirl design, 14 gauge Type 304 Stainless
Steel wall bracket, stainless steel satin finish back and access
panel allowing for front access of P-trap and stop, in-wall
mounting frame, push-button operated valve with
front-accessible cartridge and flow adjustment, polished
chrome-plated brass vandal-resistant bubbler head with
integral laminar anti-squirt flow, chrome-plated brass
vandal-resistant waste strainer, vandal-resistant bottom plate,
and 1-1/4" O.D. waste pipe.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1001MS is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. This series
is precisely mounted, making it a nice addition to any
surrounding. Beautiful satin finish helps to maintain the
fountains overall appeal so it always remains looking as new
as it did when it was installed. Specifically, this type of wall
mounted drinking fountain may be placed in settings such as:
schools and other locations in and around office buildings
where the temperature remains above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.