Specification Sheet

model 1011
Barrier-Free Dual Wall Mount Fountain
FEATURES & BENEFITS
CONSTRUCTION
18 gauge Type 304 stainless Steel swirl design bowl, 14
gauge Type 304 Stainless Steel bracket, and a
vandal-resistant bottom plate provides a long lasting unit
with added peace of mind.
QUALITY CONTROL
Both fountains are pre-built and fully water and pressure
tested to ensure proper functionality.
BACK PANEL
Stainless steel back panel helps to protect the wall from
inadvertent splashing, and its decorative satin finish
increases location visibility and completes the fountains
attractive appearance.
MOUNTING
3/16" (.47 cm) steel mounting plate with supplied mounting
hardware for a solid unit base allows for easy installation to
a framed wall. (P-trap and stop require rear access)
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
laminar flow prevents splashing while providing a superior
flow pattern. The integral basin shank and inserted roll pin
add vandal resistance strength. Shielded, angled stream
opening provides a steady, sanitary source of drinking
water at .45 gpm.
PUSH BUTTON VALVE
The push-button activated valve assembly allows for front
access stream adjustment as well as cartridge and strainer
access. The valve works at an operating pressure range of
30 to 90 psi (2.1 to 6.2 bar).
OPTIONS
Fountain Skirt: Model SK3, satin finish stainless steel cane
touch skirt for installation on high unit in some applications
that may need to comply with ADA protruding objects
guidelines.
Water Filter: Model 6426, 10" x 2" (25.4 x 5.1 cm), in-line lead
removal element that reduces lead from incoming water
supply.
Access Panel: Model 6603, satin finish stainless steel access
panel. Includes frame and screws.
Support Frame: Model 6800 universal in-wall mounting
support for use with most fountains.
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 1011 "Hi-Lo" wall mounted barrier-free drinking fountain
shall include dual 18 gauge Type 304 Stainless Steel satin finish
basins with integral swirl design, 14 gauge Type 304 Stainless
Steel wall bracket, 100% lead-free waterways, push-button
operated stainless steel valves with front-accessible cartridge
and flow adjustment, polished chrome-plated brass
vandal-resistant bubbler heads with integral laminar
anti-squirt flow, chrome-plated brass vandal-resistant waste
strainers, vandal-resistant bottom plates, stainless steel satin
finish back panel, high and low fountain mounting levels, and
1-1/4" O.D. (3.2 cm) waste pipes. (P-trap and stop require rear
access) REQUIRES MODEL 6700.4 PRICED SEPARATELY.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1011 is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. This series
is precisely mounted, making it a nice addition to any
surrounding. Beautiful satin finish helps to maintain the
fountains overall appeal so it always remains looking as new
as it did when it was installed. Specifically, this type of wall
mounted drinking fountain may be placed in settings such as:
schools and other locations in and around office buildings
where the temperature remains above freezing.Model meets
all current Federal Regulations for the disabled including
those in the Americans with Disabilities Act. Haws
manufactures drinking fountains and electric water coolers to
be lead-free by all known definitions including NSF/ANSI
Standard 61, Section 9, NSF/ANSI 372, California Proposition
65, and the Federal Safe Drinking Water Act. Product is
compliant to California Health and Safety Code 116875 (AB
1953-2006) as evaluated by CSA International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 21 February, 2018
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.