Specification Sheet

model 1025G
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button valve
assembly which allows for front access stream adjustment
as well as cartridge and strainer access, this fountain offers
the ultimate in ease of maintenance.
INTEGRATED TRAP
Spacious fountain design allows for the trap to be internally
mounted which allows for easy access, and aids and
reduces the installation process.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
BUBBLER HEAD
Patented (Pat.# 7,025,282) EnviroGard? polished
chrome-plated brass bubbler head provides sanitary
service in the worst of conditions. The stainless steel shroud
covers the orifice surface until the water is activated, and
covers it again after use.
DRAIN CLEAN-OUT
Top-down access to the drain allows the fountain to be
cleaned without taking the unit apart, which is ideal for
outdoor settings that are high in drain-clogging sediment
like leaves, garbage, and other debris.
CONSTRUCTION
Heavy-duty 11 gauge galvanized steel incorporates a
recessed push button and welded bubbler guard to
provide extra durability, and a vandal-resistant bottom
plate for added peace of mind. Stainless steel basin with a
high-polished finish compliments almost any setting, and it
also resists stains and corrosion.
OPTIONS
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Mounting: Model 6700 universal mounting plate for most
wall mounted fountains.
Support Carrier: Model 6800 universal in-wall mounting
support for use with most fountains.
Chiller: Model HCR8, 8 gph remote water chiller provides
instantaneous cooling to meet a continuous demand for
chilled water.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1025G wall mounted barrier-free drinking fountain shall
include a stainless steel basin contained in an 11 gauge
galvanized steel wall bracket, push-button operated valve
with front-accessible cartridge and flow adjustment, polished
chrome-plated brass vandal-resistant EnviroGard bubbler
head with protective bubbler guard, polished chrome-plated
brass vandal-resistant waste strainer with top-down access,
vandal-resistant bottom plate, and chrome-plated 1-1/2" IPS
trap.
APPLICATIONS
Perfect for either public or private outdoor settings, Model
1025G is a great fit in areas where durability is important.
Suitable in areas where weather conditions exist, this series is
precisely mounted to make it a nice addition. Specifically, this
type of wall mounted drinking fountain may be placed in
settings such as: parks, schools, and other outdoor
environments where the temperature remains above
freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.