Specification Sheet

model 1105
Wall Mount Fountain
FEATURES & BENEFITS
CONSTRUCTION
Unit is made of 18 gauge Type 304 stainless steel with a
satin finish that resists stains and corrosion, and has soft,
rounded corners. Unit features stainless steel satin finish
back panel, vandal-resistant bottom plate, and 1-1/4"
integral trap.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
11/16" dia. basin shank and stainless anti-rotation roll pin for
vandal resistance strength. Shielded, angled stream
opening provides a steady, sanitary source of drinking
water at .45 gpm.
DRINKING FOUNTAIN VALVE
The push-button activated valve offers the only all stainless
steel valve body that
is machined out of solid bar stock, is
fully serviceable through the front of the push button
assembly offering access to the water control cartridge
and integral water supply strainer, and with front access to
the water stream height adjustment for easy maintenance
without having to remove the valve. Operating pressure
range of 30 to 90 psi (2.1 to 6.2 bar).
INTEGRATED TRAP
All cast brass 1-1/4" NPT adjustable trap completely
concealed inside bottom plate for easy installation and
access.
FOUNTAIN PUSH BUTTON
All chrome plated brass push button resists vandalism by
allowing it to spin without unscrewing.
OPTIONS
Remote Drinking Fountain Water chiller: Model HCR8, 8 gph
(30.3 L) remote water chiller provides instantaneous cooling
to meet a continuous demand for chilled water.
Mounting Plate: Model 6700 universal mounting plate for
most wall mounted fountains. Priced Separately.
Support Frame: Model 6800 universal in-wall mounting
support for use with most fountains.
Water Filter: Model 6426, 10" x 2" (25.4 x 5.1 cm), in-line lead
removal element that reduces lead from incoming water
supply.
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 1105 wall mounted drinking fountain shall include an
18 gauge Type 304 Stainless Steel satin finish basin,
push-button operated stainless steel valve with front
accessible cartridge, in-line strainer and flow adjustment,
100% lead-free waterways, polished chrome-plated brass
vandal-resistant bubbler head, polished chrome-plated brass
vandal-resistant waste strainer, vandal-resistant stainless
bottom plate, and 1-1/4" NPT concealed all cast-brass trap.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1105 is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. Beautiful
satin finish helps to maintain the fountains overall appeal.
Specifically, this type of wall mounted drinking fountain may
be placed in settings such as: schools and other locations in
and around office buildings where the temperature remains
above freezing. Haws manufactures drinking fountains,
faucets and electric water coolers to be lead-free by all
known definitions including NSF/ANSI/CAN 61-Section 9, NSF/
ANSI/CAN 372, California Proposition 65, and the Federal Safe
Drinking Water Act. Product is compliant to California Health
and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN
61: Q ≤ 1.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 14 December, 2021
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.