Specification Sheet

model 1105
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
BUBBLER HEAD
Polished chrome-plated brass bubbler head features an
integral basin shank for added strength, and is equipped
with a shielded, anti-squirt orifice that provides a steady
sanitary source of water.
INTEGRATED TRAP
Spacious fountain design allows for the trap to be internally
mounted which allows for easy access, and aids and
reduces the installation process.
CONSTRUCTION
18 gauge Type 304 Stainless Steel construction with
vandal-resistant bottom plates provides a long lasting unit
with added peace of mind.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
PUSH BUTTON
With its patented (Pat.# 6,981,692) stainless steel,
push-button activated, valve assembly which allows for
front access stream adjustment as well as cartridge and
strainer access, this fountain offers 100% lead free
waterways.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Mounting: Model 6700 universal mounting plate for most
wall mounted fountains.
Support Carrier: Model 6800 universal in-wall mounting
support for use with most fountains.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1105 wall mounted drinking fountain shall include an
18 gauge Type 304 Stainless Steel satin finish basin,
push-button operated stainless steel valve with front
accessible cartridge and flow adjustment, 100% lead-free
waterways, polished chrome-plated brass vandal-resistant
bubbler head, polished chrome-plated brass vandal-resistant
waste strainer, vandal-resistant bottom plate, and 1-1/4" IPS
trap.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1105 is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. This series
is precisely mounted, making it a nice addition to any
surrounding. Beautiful satin finish helps to maintain the
fountains overall appeal so it always remains looking as new
as it did when it was installed. Specifically, this type of wall
mounted drinking fountain may be placed in settings such as:
schools and other locations in and around office buildings
where the temperature remains above freezing.
Haws manufactures drinking fountains, electric water coolers
and electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.