Specification Sheet

model 1107L
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
CONSTRUCTION
Heavy-duty 14 gauge Type 304 Stainless Steal construction
with integral mounting plates for extra durability. Unit
also includes vandal-resistant bottom plates for added
peace-of-mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head features an
integral basin shank for added strength, and is equipped
with a shielded, anti-squirt orifice that provides a steady
sanitary source of water.
INTEGRATED TRAP
Spacious fountain design allows for the trap to be internally
mounted which allows for easy access, and aids and
reduces the installation process.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
ANTIMICROBIALLY TREATED
Specific components are antimicrobially treated using the
natural protection of silver. Silver helps protect against the
growth of mold and mildew on the treated components.
Treated surfaces include bubbler head, push button, waste
strainer and trap.
ACCESS
Low profile designed bowl and integral trap that is set back
for knee clearance allows for adult or child ADA access
(when installed at appropriate heights).
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button stainless
steel valve assembly which allows for front access stream
adjustment as well as cartridge and strainer access, this
fountain offers 100% lead free waterways.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Mounting: Model 6700 universal mounting plate for most
wall mounted fountains.
Support Carrier: Model 6800 universal in-wall mounting
support for use with most fountains.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1107L wall mounted barrier-free drinking fountain shall
include a 14 gauge Type 304 Stainless Steel satin finish basin
with integral ¼" stainless steel mounting plate,
antimicrobially treated bubbler head, push button, waste
strainer and trap to protect against the growth of mold and
mildew on the treated components. Push-button operated
stainless steel valve with front-accessible cartridge and flow
adjustment provides 100% lead free waterways, polished
chrome-plated brass vandal-resistant bubbler head, polished
chrome-plated brass vandal-resistant waste strainer,
vandal-resistant bottom plate, and a 1-1/4" IPS internal trap.
Unit can be mounted to meet ADA or Child ADA
specifications.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
the 1107L is a great fit in areas where aesthetics are important
to the overall appeal of the architecture. This series is
precisely mounted, making it a nice addition to any
surrounding. Beautiful satin finish helps to maintain the
fountains overall appeal so it always remains looking as new
as it did when it was installed. Specifically, this type of wall
mounted drinking fountain may be placed in settings such as:
schools and other locations in and around office buildings
where the temperature remains above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.