Specifications Sheet

model 1109
Barrier-Free Wall Mount Fountain
FEATURES & BENEFITS
CONSTRUCTION
Unit is made of 18 gauge Type 304 stainless steel with a
satin finish that resists stains and corrosion, and has soft,
rounded corners. Unit features stainless steel satin finish
back panel, vandal-resistant bottom plate, and 1-1/4"
integral trap.
INTEGRATED TRAP
Brass 1-1/4" NPT trap is internally mounted for easy
installation and access.
QUALITY CONTROL
Pre-built fountain is pressure tested to ensure no leaks and
proper functionality.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
basin shank for added strength. Shielded, angled stream
opening provides a steady, sanitary source of drinking
water at .45 gpm.
PUSH BUTTON VALVE
The push-button activated valve assembly allows for front
access stream adjustment as well as cartridge and strainer
access. The valve works at an operating pressure range of
30 to 90 psi (2.1 to 6.2 bar).
OPTIONS
Back Panel: Model BP3, satin finish stainless steel back
panel.
Water Filter: Model 6426, 10" x 2" (25.4 x 5.1 cm), in-line lead
removal element that reduces lead from incoming water
supply.
Mounting Plate: Model 6700 universal mounting plate for
most wall mounted fountains. Priced Separately.
Support Frame: Model 6800 universal in-wall mounting
support for use with most fountains.
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 1109 barrier-free wall mounted drinking fountain shall
include an 18 gauge Type 304 Stainless Steel satin finish basin,
push-button operated stainless steel valve with front
accessible cartridge and flow adjustment, 100% lead-free
waterways, polished chrome-plated brass vandal-resistant
bubbler head, polished chrome-plated brass vandal-resistant
waste strainer, vandal-resistant bottom plate, and 1-1/4" NPT
trap.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1109 is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. This series
is precisely mounted, making it a nice addition to any
surrounding. Beautiful satin finish helps to maintain the
fountains overall appeal so it always remains looking as new
as it did when it was installed. Specifically, this type of wall
mounted drinking fountain may be placed in settings such as:
schools and other locations in and around office buildings
where the temperature remains above freezing.Model meets
all current Federal Regulations for the disabled including
those in the Americans with Disabilities Act. Haws
manufactures drinking fountains and electric water coolers to
be lead-free by all known definitions including NSF/ANSI
Standard 61, Section 9, NSF/ANSI 372, California Proposition
65, and the Federal Safe Drinking Water Act. Product is
compliant to California Health and Safety Code 116875 (AB
1953-2006).
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 29 June, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.