Specification Sheet

ManualsBrandsHaws ManualsDrinking FountainsHaws 1 GPM Wall Mounted Bottle Filler

model 1920

Bottle Filler

FEATURES & BENEFITS

PUSH BUTTON

With its patented stainless steel, push-button activated

valve assembly which allows for front access stream

adjustment as well as cartridge and strainer access, this

bottle filler offers 100% lead free waterways. The valve

works at an operating pressure range of 30 to 90 psi (2.1 to

6.2 bar).

CONSTRUCTION

Unit is made of 14 gauge Type 304 stainless steel with a

satin finish that resists stains and corrosion, and has soft

rounded corners. Unit features vandal-resistant bottom

plate and dispensing nozzle.

LAMINAR FLOW

Adjustable, splash-free, 1 gpm (3.78 L) laminar water flow.

EFFICIENT & FLEXIBLE INSTALLATION

Unit is designed for retrofit or new construction

applications. No drain required for mounting over existing

drinking fountain.

DURABLE BUILD

Good for indoor or outdoor applications (in non-freezing

areas). Made with 100% Stainless Steel for vandal

resistance.

MOUNTING OPTIONS

Select from mounting plate and back panel models to

complete installation. Unit can mount on various wall types.

OPTIONS

Mounting Plate: Model 6700 universal mounting plate for

most wall mounted fountains. Priced Separately.

Mounting Plate: Model 6700R mounting plate is used with

the 1920 series bottle fillers for single or dual fountain retrofit

installations.

Back Panel: Model BP15, satin finish stainless steel 15 inch

back panel for Model 1920.

Back Panel: Model BP32, satin finish stainless steel 32" back

panel for model 1920 bottle filler.

For more information, visit www.hawsco.com or call (888)

640-4297.

SPECIFICATIONS

Model 1920 wall mounted bottle filler shall include 100%

lead-free waterways, satin stainless steel construction, 1 gpm

(3.78 L) laminar flow, push-button operated stainless steel

valve with front-accessible cartridge and flow adjustment. It

can be used as a stand-alone station or mounted above the

Haws® 1001, 1011, 1107L, 1109, 1117L, and 1119 series

drinking fountains.

APPLICATIONS

This type of wall mounted bottle filler may be placed in

settings such as schools and other locations in and around

office buildings with existing fountain installations where the

temperature remains above freezing. Haws® manufactures

drinking fountains and electric water coolers to be lead-free

by all known definitions including NSF/ANSI 61, Section 9,

NSF/ANSI 372, California Proposition 65, and the Federal Safe

Drinking Water Act. Product is compliant to California Health

and Safety Code 116875 (AB 1953-2006).

1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 09 November, 2017

DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

Summary of content (6 pages)

PAGE 1
model 1920 Bottle Filler FEATURES & BENEFITS PUSH BUTTON With its patented stainless steel, push-button activated valve assembly which allows for front access stream adjustment as well as cartridge and strainer access, this bottle filler offers 100% lead free waterways. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). CONSTRUCTION Unit is made of 14 gauge Type 304 stainless steel with a satin finish that resists stains and corrosion, and has soft rounded corners.
PAGE 2
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 1920 MOUNTING HOLE LOCATIONS NOTES: 1. SEE SEPARATE INSTALLATION DRAWINGS FOR MOUNTING PLATES AND BACKPANELS 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO FOR INSTALLATION LOCATIONS, WASTE & SUPPLY REQUIREMENTS OTHER THAN SHOWN.
PAGE 3
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 6700 MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) 6700.4L MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) BP32/BP32HPS 1920/1920HPS (IF FOUNTAIN HIGH/LOW SIDES ARE REVERSED USE BP32R) INSTALLATION ABOVE HAWS 1011, 1011HPS, 1011HPSMS, 1011MS, H1011.8, H1011.8HO, H1011.
PAGE 4
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 6700.4L MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) BP32 1920 (IF FOUNTAIN HIGH/LOW SIDES ARE REVERSED USE BP32R) 6469 INSTALLATION ABOVE HAWS 1119, 1119.14, H1119.
PAGE 5
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 6700 MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) 6700.4L MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) BP32 1920 (IF FOUNTAIN HIGH/LOW SIDES ARE REVERSED USE BP32R) INSTALLATION ABOVE HAWS 1117L, H1117.8 1920 BP15 INSTALLATION ABOVE HAWS 1107L, H1107.
PAGE 6
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 6700 MOUNTING PLATE (BEHIND FINISH WALL) - OR BOLT 1920 ON TO EXISTING WALL 6700.