Specification Sheet

model 2000S
Recessed-Mount Hydration By Haws
™
Bottle Filler
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: August, 2017
DISCLAIMER: Continued product improvements make specications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
SPECIFICATIONS
APPLICATIONS
SenSor operated
Electric sensor allows for touch-free hygienic operation,
eliminating the need for manual activation.
Quality Control
The Haws bottle lling station is pre-built and fully water and
pressure tested to ensure no leaks and proper function for
reduced installation time and added peace of mind.
duraBle FiniSh
#4 satin stainless steel back panel can be easily cleaned
and maintained while also resisting corrosion.
ServiCing & SeCurity
Durable ABS plastic front panel allows simple access
to internal components. 30-second time-out prevents
unwanted use. Hidden lock and hinges discourage
vandals.
advanCed Filtration
2,500-gallon (9464 L) capacity, electronic lifecycle control
lter cartridge will shut off water ow when capacity
is reached to ensure fresh, ltered water with every
activation. Filter replacement indicator light will ash
yellow when lter life is at 10% and will ash red when
replacement is necessary. Preparing to replace lter is
important when the lter light ashes yellow.
eXtended Warranty
Superior engineering incorporated into this product carries an
extended 3 year warranty.
Replacement Filter: Model 6423 is the 2,500-gallon
(9464 L) replacement lter with electronic lifecycle
control for the Hydration By Haws™ Model 2000S
Remote Drinking Fountain Water Chiller: Model
HCR8, 8 GPH (30.3 L) remote chiller provides for
instantaneous cooling to meet a continuous demand
for chilled water.
2000 Series Mounting Frame: Model MTGFR.HSC,
galvanized steel mounting frame with grille for the
2000 series bottle lling stations.
o
o
o
Model 2000S Hydration By Haws™ water dispenser is a semi-
recessed, wheelchair accessible bottle or cup lling station
constructed of durable ABS plastic and 16-gauge, Type 304
Stainless Steel with a satin nish. It features an electric sensor
for touch-free hygienic operation, a 30-second timeout
preventing unwanted use, laminar ow to prevent splashing,
and a .5 gpm (1.9 L) ow rate for quick ll-up. 2,500-gallon
(9464 L) carbon block lter reduces chlorine (taste and odor)
and lead, and removes 99.99% of cysts. The mounting frame is
of heavy-gauge, galvanized steel. 110 volt, 60Hz, and .1 amp
draw when in use. Tailpiece is 1-1/4” (32 mm) O.D. Provision for
trap (not included) must be made in or behind wall.
FEATURES & BENEFITS
OPTIONS
Perfect for either public or private indoor settings, the
Hydration By Haws™ water dispenser is a great t in areas
where aesthetics are important to the overall appeal of the
architecture. Specically, this type of semi-recessed, wall-
mounted bottle lling station is ideal for ofce buildings,
airports, schools, manufacturing facilities and municipalities.
Model 2000S meets the Americans with Disabilities Act when
mounted at the correct height. Haws manufactures drinking
fountains and electric water coolers to be lead-free by all
known denitions including NSF/ANSI Standard 61, Section 9,
NSF/ANSI Standards 42 & 53, NSF/ANSI 372 and CSA Standard
B483.1. Product is compliant to California Health and Safety
Code 116875 (AB 1953), California Proposition 65 and the
Federal Safe Drinking Water Act. Model 2000S is certied to
the Standard for Water Treatment Appliances (UL979).