Specification Sheet

model 2000SMS
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: August, 2017
DISCLAIMER: Continued product improvements make specications subject to change without notice. Check www.hawsco.com for the latest product information and updates.
SPECIFICATIONS
APPLICATIONS
FEATURES & BENEFITS
The surface-mount Hydration By Haws™ bottle lling station
is perfect for mounting on block or solid walls which cannot
be cut into and where a recessed mount station is not an
option. The surface-mount unit does not require a drain trap
and has an integrated drain pan allowing it to be mounted
in any location where there is a reasonable access to a
water line. Specically, this bottle lling station is ideal for
ofce buildings, airports, schools, manufacturing facilities
and municipalities.
Model 2000SMS meets the Americans with Disabilities Act
when mounted at the correct height, and cane bump
bar is properly installed (see Operators Manual). Haws
manufactures drinking fountains and electric water coolers
to be lead-free by all known denitions including NSF/ANSI
Standard 61, Section 9, NSF/ANSI Standards 42 & 53, NSF/
ANSI 372, and CSA Standard B483.1. Product is compliant
to California Health and Safety Code 116875 (AB 1953),
California Proposition 65 and the Federal Safe Drinking
Water Act. Model 2000SMS is certied to the standard for
Water Treatment Appliances (UL979).
Model 2000SMS Hydration By Haws™ water dispenser is a
wall-mounted bottle or cup lling station constructed of
durable ABS plastic and 16-gauge, Type 304 Stainless Steel
with a satin nish. It features an electric sensor allowing
for touch-free hygienic operation, laminar ow to prevent
splashing, and a .5 gpm (1.3 L) ow rate for quick ll-up. 2,500
gallon (9464 L) carbon block lter reduces chlorine (taste
and odor) and lead, and removes 99.99% of cysts. Hidden
lock and hinges on ABS plastic front panel allows access
to internal components. The mounting consists of heavy-
gauge galvanized steel mounting bracket and hardware,
and an adjustable, external electrical cord with maximum
length of 6’. 110 volt, 60Hz, and .1 amp draw when in use.
A removable water catch basin is provided; this may be
converted to a hard-plumbed drain with a retrot kit.
Surface-Mount Hydration By Haws
™
Bottle Filler
SenSor operated
Electric sensor allows for touch-free hygienic operation,
eliminating the need for manual activation.
Quality Control
The Haws bottle lling station is pre-built and fully water and
pressure tested to ensure no leaks and proper function for
reduced installation time and added peace of mind.
duraBle FiniSh
#4 satin stainless steel back panel can be easily cleaned
and maintained while also resisting corrosion.
ServiCing & SeCurity
Durable ABS plastic front panel allows simple access
to internal components. 30-second time-out prevents
unwanted use. Hidden lock and hinges discourage
vandals.
advanCed Filtration
2,500-gallon (9464 L) capacity, electronic lifecycle control
lter cartridge will shut off water ow when capacity
is reached to ensure fresh, ltered water with every
activation. Filter replacement indicator light will ash
yellow when lter life is at 10% and will ash red when
replacement is necessary. Preparing to replace lter is
important when the lter light ashes yellow.
eXtended Warranty
Superior engineering incorporated into this product carries an
extended 3 year warranty.
Replacement Filter: Model 6423 is the 2,500-gallon
(9464 L) replacement lter with electronic lifecycle
control for the Hydration By Haws™ Model 2000SMS
Remote Drinking Fountain Water Chiller: Model
HCR8, 8 GPH (30.3 L) remote chiller provides for
instantaneous cooling to meet a continuous demand
for chilled water.
Surface-Mount Bottle Filler Drain Kit: Model 6470,
optional drain assembly kit for 2000SMS surface-mount
bottle lling stations.
o
o
o
OPTIONS