Specification Sheet

A
B
FINISHED GRADE
TO SPOUT
STEP 1: ATTACH ENTIRE ARM ASSEMBLY TO MOUNTING PLATE ON PEDESTAL
USING THE 3/8" -16 X 1" BOLTS AND WASHERS (SUPPLIED) AND
TIGHTEN SECURELY IN PLACE.
STEP 2: (OPTIONAL) APPLY CAULKING AS NEEDED TO FILL ANY GAP BETWEEN
ARM AND PEDESTAL.
3 SIDE ARM IS ADJUSTABLE TO ACCOMODATE EITHER CHILD OR ADULT
HEIGHTS (SEE "AVAILABLE ARM HEIGHTS" CHART).
4 BASED ON DESIRED HEIGHT (CHILD OR ADULT) OF ARM, ORIENT
BACKPLATE AS SHOWN IN FIGURE 1 AND USE APPROPRIATE SHADED
HOLES.
5 WASTE ASSEMBLY IS SUPPLIED DISASSEMBLED. THE SHORTER OF THE
TWO PIECES IS FOR THE ARM DRAIN, AND MUST BE INSTALLED SO THAT
ANY BEND IN THE FLEX TUBING WILL ALLOW WATER TO DRAIN
COMPLETELY. THE LONGER IS FOR THE PEDESTAL DRAIN AND IS SUPPLIED
AT THE LENGTH REQUIRED TO ASSEMBLE THE UNIT WITH THE ARM AT
CHILD HEIGHT. IN ORDER TO ASSEMBLE AT ADULT HEIGHT, 3" MUST BE
CUT FROM THE END OF THE FLEX TUBING PRIOR TO ASSEMBLY. TEE IS
TO BE GLUED TO THE FLEX TUBING WASTE ARMS USING PVC PIPE CEMENT.
OUTLET
24" / 610mm
27" / 686mm
29-3/4" / 756mm
32-3/4" / 832mm
B
A
CHILD ADA
ADULT ADA
DIM
CHILD ADULT
BACKPLATE
KNEE
CLEARANCE
AVAILABLE ARM HEIGHTS
FIGURE 1
NOTES:
(8")
4
4
5
APPROVED:
DRAWN:
PART NUMBER
SCALE:
SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
CJL 09/92
26
0002077070.D
3150
1:13
22
FV
11/23/17
GC
INSTALLATION
5258
2017
JP