Specification Sheet

model 3300G
Pedestal Mounted Drinking Fountain
FEATURES & BENEFITS
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button valve
assembly which allows for front access stream adjustment
as well as cartridge and strainer access, this fountain offers
the ultimate in ease of maintenance.
BARRIER-FREE
Barrier-free capabilities combined with its ease of use
allows for a number of installation location possibilities.
BUBBLER HEAD
Patented (Pat.# 7,025,282) EnviroGard? polished
chrome-plated brass bubbler head provides sanitary
service in the worst of conditions. The stainless steel shroud
covers the orifice surface until the water is activated, and
covers it again after use.
DRAIN CLEAN-OUT
Top-down access to the drain allows the fountain to be
cleaned without taking the unit apart, which is ideal for
outdoor settings that are high in drain-clogging sediment
like leaves, garbage, and other debris.
CONSTRUCTION
Heavy-duty 11 gauge galvanized steel incorporates a
recessed push button and welded bubbler guard to
provide extra durability, and a vandal-resistant bottom
plate for added peace of mind. Stainless steel basin with a
high-polished finish compliments almost any setting, and it
also resists stains and corrosion.
OPTIONS
Bib Faucet: Model 6250LF, self-closing, plain end, lead-free,
brass bib faucet with polished chrome-plated finish.
Hose Bib: Model 6275, compression hose bib faucet
assembly with rough chrome-plated finish.
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Sand Trap: Model 6611, sand trap for installing adjacent to
pedestal drinking fountains to help prevent debris and
contaminants from clogging waste line.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 3300G "Hi-Lo" barrier-free pedestal drinking fountain
shall include an 11 gauge galvanized steel pedestal, polished
stainless steel basins, push-button operated valves with
front-accessible cartridge and flow adjustment, polished
chrome-plated brass bubbler heads with patented
contaminate protective pop-up canopy backed against
pedestal guards, polished chrome-plated vandal-resistant
waste strainers with top-down clean-out access,
vandal-resistant access plates, integral mounting feet, and
1-1/2" slip waste.
APPLICATIONS
This drinking fountain has a unique application at parks and
golf courses where conservation efforts are moving many
facilities towards using less expensive non-potable water for
irrigation. By shielding the bubbler head, this unit also provides
peace of mind to those using the fountain that possible
contaminants won’t be passed through the drinking
water. The 3300G offers a solution for outdoor wheelchair
access as well as vandal-resistance, appealing to all users
through accessibility and safety. This series may also be a nice
addition to areas such as parks, schools, and other areas
where drinking facilities are needed.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.