Specification Sheet

model 3377
Pedestal Mounted Drinking Fountain
FEATURES & BENEFITS
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button valve
assembly which allows for front access stream adjustment
as well as cartridge and strainer access, this fountain offers
the ultimate in ease of maintenance.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
laminar flow prevents splashing and provides a superior
flow pattern. The integral basin shank and inserted roll pin
adds vandal resistance strength to the design, and the
shielded angled stream orifice produces a steady sanitary
source of water.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
CONSTRUCTION
Heavy-duty 3/16" galvanized steel pedestal is supported by
an integral mounting plate, supplied with a top down
access plate, and is finished with green powder-coat
paint. 18 gauge Type 304 Stainless Steel fountain with
attractive and functional swirl bowl design, along with a
vandal-resistant bottom plate provides a long lasting unit
with added peace of mind.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Bib Faucet: Model 6250LF, self-closing, plain end, lead-free,
brass bib faucet with polished chrome-plated finish.
Hose Bib: Model 6275, compression hose bib faucet
assembly with rough chrome-plated finish.
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 3377 barrier-free pedestal drinking fountain shall
include an 18 gauge Type 304 Stainless Steel satin finish basin
with integral swirl design, 14 gauge Type 304 Stainless Steel
bracket, push-button operated valve with front-accessible
cartridge and flow adjustment, polished chrome-plated brass
vandal-resistant bubbler head with integral laminar anti-squirt
flow, chrome-plated brass vandal-resistant waste strainer,
vandal-resistant bottom plate, 3/16" galvanized steel
top-access pedestal with green powder-coated finish,
integral mounting plate, and 1-1/4" IPS waste.
APPLICATIONS
Perfect for either public or private outdoor settings, the 3377 is
a great fit in areas where aesthetics are important to the
overall appeal of the architecture. Suitable in areas where
weather conditions exist, this series stands strong as a nice
addition to any community. Powder-coated finish helps to
maintain the fountain's overall appeal so it remains looking as
new as it did when it was installed. This type of pedestal
drinking fountain may also be placed in a variety of settings
such as: parks, schools, and other outdoor environments
around office buildings where the temperature remains
above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.