Specification Sheet

ATTACH PEDESTAL EXTENSION USING (4) 1/4-20
(SUPPLIED)
& WASHERS 4X
3/8-16 HEX BOLTS
ACCESS PLATE AND SCREWS RELOCATED
1 REFER TO 5874HF OPERATION AND MAINTENANCE MANUAL FOR
PUSH BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTRUCTIONS.
1
APPROVED:
DRAWN:
PART NUMBER
REVISION
SCALE:
SHEET OFDRAWING TYPE: SIZE: A
BY:ECN NO.
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
MJ 06/08/16
1
0510000494.D
3377BF/3377BFG
1:15
11
JL
06/22/16
5081
RVH
INSTALLATION
5081
2016
INSTALLATION INSTRUCTIONS:
1)
VERI
FY THAT THE WATER SUPPLY IS SHUT OFF TO THE FOUNTAIN.
2)
REM
OVE THE ACCESS PLATE FROM THE EXISTING 3377 PEDESETAL.
CUT THE EXI
STING 3/8" PLASTIC WATER SUPPLY LINE AND INSTALL
THE 3/8" TEE WITH THE 24" TUBE EXTENSION COMING OUT THE TOP.
3)
FE
ED THE WATER SUPPLY TUBE THROUGH HOLE IN THE BOTTOM PLATE
OF THE PEDEST
AL EXTENSION. BOLT THE PEDESTAL EXTENSION ONTO
THE 3
377 FOUNTAIN USING THE (4) 1/4-20 FLATHEAD BOLTS PROVIDED.
A BAL
L-END HEX WRENCH IS RECOMMENDED FOR BOLT INSTALLATION.
4) INSTALL THE BOTTLE FILLER BRACKET ONTO THE PEDESTAL USING
THE (
4) 3/8-16 HEX BOLTS PROVIDED. CONNECT THE SUPPLY LINE TUBE
TO THE PUSH BUTT
ON VALVE.
5) RE-INSTALL THE ACCESS PLATE ON TOP THE PEDESTAL EXTENSION.
AND INSTALL THE 3/8" TEE FOR BOTTLE FILLER
CUT THE FOUNTAIN Ø 3/8" WATER SUPPLY TUBING
FLATHEAD SCREWS (SUPPLIED)
FROM EXISTING 3377 FOUNTAIN
(SUPPLIED)