Specification Sheet

model 3377FR
Pedestal Mounted Drinking Fountain
FEATURES & BENEFITS
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with an
integral basin shank and inserted roll pin adds vandal
resistance strength to the design, and the shielded angled
stream orifice produces a steady sanitary source of water.
ALL-WEATHER CAPABILITIES
Fully engineered system with the pneumatic operated
freeze-resistant valve installed below frost line to drain
water to non-freezing depth allowing fountain to function
year-round. Assembly can be lifted to surface and lowered
back into casing for easy maintenance without disturbing
the fountain.
CONSTRUCTION
Heavy-duty 3/16" galvanized steel pedestal is supported by
an integral mounting plate, supplied with a top down
access plate, and is finished with green powder-coat
paint. 18 gauge Type 304 Stainless Steel fountain with
attractive and functional swirl bowl design, along with a
vandal-resistant bottom plate provides a long lasting unit
with added peace of mind.
PUSH BUTTON
Polished chrome-plated push-button requires less than 5
lbs. to activate.
OPTIONS
Valve Box: Model 6625, ground box with lid, used with
freeze-resistant valve models 6518FR and 6518.2FR.
Premier Colors: Nine powder-coated colors, (green, silver,
red, blue, black, brown, orange, yellow and white),
available for an additional charge.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 3377FR barrier-free freeze-resistant pedestal drinking
fountain shall include a 14 gauge Type 304 Stainless Steel
satin finish bracket and 18 gauge Type 304 Stainless Steel satin
finish basin with integral swirl design, polished chrome-plated
brass vandal-resistant bubbler head, polished chrome-plated
brass push-button, chrome-plated brass vandal-resistant
waste strainer, vandal-resistant bottom plate, 3/16"
galvanized steel top-access pedestal with green
powder-coated finish, integral mounting plate, and 1-1/4" IPS
waste.
APPLICATIONS
Perfect for either public or private outdoor settings, the
3377FR is a great fit in areas where aesthetics are important to
the overall appeal of the architecture. Suitable in areas
where weather conditions exist, this series stands strong as a
nice addition to any community. Powder-coated finish help
to maintain the fountains overall appeal so it remains looking
as new as it did when it was installed. This type of pedestal
drinking fountain may also be placed in a variety of settings
such as: parks, schools, and other outdoor environments
around office buildings where the temperature may drop into
freezing conditions.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.