Features Guide

3377G
Pedestal Mounted Drinking Fountain
Push Button
With its patented (Pat.# 6,981,692) push-button valve assembly
which allows for front access stream adjustment as well as
cartridge and strainer access, this fountain offers the ultimate in
ease of maintenance.
Quality Control
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced installation time
and added peace of mind.
Bubbler Head
Polished chrome-plated brass bubbler head with integral laminar
flow prevents splashing and provides a superior flow pattern.
The integral basin shank and inserted roll pin adds vandal
resistance strength to the design, and the shielded angled
stream orifice produces a steady sanitary source of water.
Finish
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
Construction
Heavy duty 3/16" galvanized steel pedestal is supported by an
integral mounting plate, and access is gained from the top down
access plate. 18 gauge Type 304 Stainless Steel fountain with
attractive and functional swirl bowl design, along with a
vandal-resistant bottom plate provides a long lasting unit with
added peace of mind.
FEATURES & BENEFITS
o
Bubbler Head: Model 5725 EnviroGard™ bubbler is a polished
chrome-plated solid brass bubbler head with stainless steel
water activated pop up canopy. (Pat.# 7,025,282)
o
Hose Bib: Model 6275, compression hose bib faucet assembly
with rough chrome-plated finish.
o
Bib Faucet: Model 6250LF, self-closing, plain end, lead-free,
brass bib faucet with polished chrome-plated finish.
o
Filter: Model 6426, 12" x 2", in-line lead removal element that
reduces lead from incoming water supply.
To see all options for this model, visit www.hawsco.com.
OPTIONS
Model 3377G barrier-free pedestal drinking fountain shall include a
14 gauge Type 304 Stainless Steel satin finish bracket, 18 gauge
Type 304 Stainless Steel satin finish basin with integral swirl
design, push-button operated valve with front-accessible cartridge
and flow adjustment, polished chrome-plated brass
vandal-resistant bubbler head with integral laminar anti-squirt flow,
chrome-plated brass vandal-resistant waste strainer,
vandal-resistant bottom plate, 3/16" galvanized steel top-access
pedestal, integral mounting plate, and 1-1/4" IPS waste.
SPECIFICATIONS
Perfect for either public or private outdoor settings, the 3377G is a
great fit in areas where aesthetics are important to the overall
appeal of the architecture. Suitable in areas where weather
conditions exist, this series stands strong as a nice addition to any
community. Galvanized finish help to maintain the fountains overall
appeal so it remains looking as new as it did when it was installed.
This type of pedestal drinking fountain may also be placed in a
variety of settings such as: parks, schools, and other outdoor
environments around office buildings where the temperature
remains above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and electric
drinking fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65, and
the Federal Safe Drinking Water Act.
APPLICATIONS
1455 Kleppe Lane | Sparks, NV 89431 | [p] 775.359.4712 | [f] 775.359.7424 | [e] [e-mail] | www.hawsco.com | 9 April, 2009
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.