Specification Sheet

An instructional label is visible when the hinged panel is opened, noting how to replace
the filter (see below).
NOTE: Water does not need to be shut off to replace the filter cartridge; however, it
should be shut off if the filter head is going to be left without a cartridge installed for a
long period of time.
FILTER LOCATION & REPLACEMENT
1. Disconnect old filter cartridge’s wiring and unscrew cartridge.
2. Screw new cartridge firmly into filter head; connect cartridge wiring.
3. Filter status LED should flash green both after hinged panel is first closed
and when water is dispensing. If it does not, consult the Troubleshooting Guide.
4. Five gallons of water must be run through the system after the cartridge is
installed in order to remove the loose carbon particles from the filter cartridge
and any air bubbles from the system.
5. Open unit and examine to assure that there are no leaks; close unit.