Specification Sheet

APPROVED:
DRAWN:
PART NUMBER
SCALE:
SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
MJ 06/27/16
2
0510000492.D
MODEL 6700R INSTALLATION
1:1
11
FV
02/27/17
5081
FV
INSTALLATION
5172
2017
MJ
4" [102mm]
2
1
2
" [64mm]
1
7
8
" [47mm]
5
5
8
" [143mm]
4" [102mm]
3" [76mm]
5
1
8
" [130mm]
13'' [330mm]
6
1
2
" [165mm]
3" [76mm]
7" [178mm]
8
1
2
" [216mm]
NOTES:
1. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE
ADHERED TO.
2. FOR CONCRETE/MASONARY WALLS, DO NOT INSTALL THE MOUNTING PLATE
ON THE SAME SIDE OF WALL AS FOUNTAIN/BOTTLE FILLER. CALL TECHNICAL
SUPPORT IF THERE ARE ANY QUESTIONS AS TO HOW TO OBTAIN A PROPER
ANCHOR IN CONCRETE/MASONARY WALL. 1-800-766-5612
3/8-16 UNC - 2B THRU
ALL THREADED HOLES
FULLY TIGHTEN
NUTS TO SECURE
STUDS IN PLACE.
7'' [178mm]
14'' [355.6mm]
STEP 1
PLACE BACKPLATE ON
TOP OF INSTALLED
DRINKING FOUNTAIN.
MARK THE HOLE
LOCATIONS ONTO THE
WALL.
STEP 2
LINE UP THE 6700R
MOUNTING PLATE
OVER THE MARKED
HOLES. ATTACHED
THE PLATE TO THE
WALL USING
APPROPRIATE
ANCHORS.
STEP 3
INSTALL THE STUDS
IN THE MOUNTING
PLATE BY SECURING
WITH NUTS AND
WASHERS. RECESS
FOR THE REAR
NUTS MAY BE
REQUIRED.
MARK THESE
HOLE LOCATIONS
BP15 SHOWN
MODEL 6700R