Specification Sheet

model 7260B-7270B
AXION
®
MSR Wall Mount Eye/Face Wash
FEATURES & BENEFITS
QUALITY CONTROL
Eye/face wash and valve assembly is pre-built and fully
water/pressure tested to ensure no leaks and proper
function which ultimately reduces installation time and
gives the end contractor an added peace of mind. Unit
also ships with pre-assembled cast-aluminum wall bracket
to assist in the installation process.
BOWL
The 11" (27.9 cm) round green ABS plastic receptor is
resistant to damage from alkalies
STRAINERS/FILTERS
Chrome-plated brass in-line 50 x 50 mesh water strainer
prevents debris from reaching the eyewash so the unit
stays functioning at its best. Strainer is easily serviceable.
EYE/FACE WASH
AXION® MSR eye/face wash head (patent pending) uses
an inverted directional laminar flow to sweep
contaminants away from the vulnerable nasal cavity.
OPTIONS
Test Tag: SP170 is a green waterproof test card with space
for date and initials of inspector. Used to record weekly
testing of emergency equipment.
Waste Trap: Model SP95 chrome-plated brass trap with
tailpiece. 1-1/2" NPT.
Instantaneous Water Heater: Model TWBS.EW.H,
prepackaged instantaneous electrical water heater, 480
VAC/3 phase/20 kW, fully engineered and tested system
with fail-safe features to produce up to 6 gpm (22.7 L)
tempered water for eye washes.
Dust Cover: Model 9102 is a stainless steel cover that
protects the eyewash heads as well as the bowl. (Picture
shows cover mounted to an eyewash.)
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 7260B-7270B wall mounted eye/face wash shall
include a green ABS plastic 11" (27.9 cm) bowl, an AXION®
MSR eye/face wash head shall feature inverted directional
laminar flow which achieves Zero Vertical Velocity™
supplied by an integral 3.7 gpm flow control, chrome-plated
brass stay-open ball valve equipped with stainless steel ball
and stem, and chrome-plated brass in-line 50 x 50 mesh
water strainer. Unit shall also include cast-aluminum chromate
protected wall bracket, yellow plastic pop-off dust cover for
eyewash head, universal sign, 1/2" NPT inlet, and 1-1/4" NPT
waste.
APPLICATIONS
Where the eyes of any person may be exposed to injurious or
corrosive materials, suitable facilities for quick flushing and
cleansing of the eyes must be provided within the work area
for immediate emergency use. Emergency eyewash facilities
shall be in unobstructed and accessible locations that require
no more than 10 seconds for the injured person to
reach.Model 7260B-7270B is certified by CSA to meet the ANSI
Z358.1 Standard for Emergency Eyewash and Shower
Equipment.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 23 February, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.