User Manual

3 1/2 [89]
3 [76]
4 1/8 [103]
11 1/4 [286]
14 1/2 [371]
14 1/8 [359]
8 1/2 [216]
1/2" NPT
SUPPLY
L-STRAINER
TAILPIECE 1-1/4" O.D.
(SUPPLIED WITH
7260BT-7270BT ONLY)
1-1/2" (F) NPT WASTE TRAP
(SUPPLIED WITH
7260BT-7270BT ONLY)
WALL
MOUNT
DETAIL
3 3/4 [94]
MAX. 45" [1143]
MIN. 33" [838]
6" [154]
BRACKET FOR
OPTIONAL DUST COVER
1 [41]
NOTES:
1. METRIC DIMENSIONS ARE IN BRACKETS [X]. 2. TO COMPLY WITH ANSI Z358.1-2009 FOR EMERGENCY EYEWASH OR EYE/FACE WASH: - UNIT SHALL BE INSTALLED IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS AND ACCEPTABLE PLUMBING PRACTICES. - EYEWASH OR EYE/FACE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THEN 83.8 CM (33 IN.) AND NO GREATER THAN 114.3 CM (45 IN.) FROM SURFACE ON WHICH USER STANDS AND 15.3 CM (6 IN.) MINIMUM FROM WALL OR NEAREST OBSTRUCTION. 3. DIMENSIONS MAY VARY BY ± 1/2 [13].
10 3/8 [264] ±1 [25]
1 1/4" NPT
OUTLET
(7260B-7270B)
APPROVED: DRAWN:
PART NUMBER
SCALE:
SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
SLS
5/1/08
18
0002080038.D
7260B-7270B/7260BT-7270BT
1:1
11
FV
08/01/16
4161
VWC
4 of 4
INSTALLATION
5113
2016
VWC
(MOUNTING HARDWARE
NOT SUPPLIED)
3X ø5/16 [ø8]