Specification Sheet

model 7360BT-7460BT
AXION
®
MSR Wall Mount Eye/Face Wash
FEATURES & BENEFITS
QUALITY CONTROL
Eye/face wash and valve assembly is pre-built and fully
water/pressure tested to ensure no leaks and proper
function which ultimately reduces installation time and
gives the end contractor an added peace of mind. Unit
also ships with pre-assembled cast-aluminum wall bracket
to assist in the installation process.
BOWL
The 11" (27.9 cm) round stainless steel receptor is supplied
with a No. 2L bright finish on its exterior
TRAP
1-1/2" IPS chrome-plated brass trap with tailpiece allow for
the emergency equipment to meet desired requirements
for wall mounting.
STRAINERS/FILTERS
Chrome-plated brass in-line 50 x 50 mesh water strainer
prevents debris from reaching the eyewash so the unit
stays functioning at its best. Strainer is easily serviceable.
EYE/FACE WASH
AXION® MSR eye/face wash head uses an inverted
directional laminar flow to sweep contaminants away from
the vulnerable nasal cavity.
OPTIONS
Scald Protect Bleed Valve: Model SP157A, stainless steel
scald protection bleed valve. Automatic thermal actuator
bleed valve opens when internal water temperature
reaches 98° F (36.7° C) and closes at 95° F (35° C).
Thermostatic Mixing Valve: Model 9201EW AXION®
Emergency Tempering Valve thermostatically mixes hot
and cold water to provide a safe fluid supply for a single
emergency eye/face wash, with a flow rate of 10 gpm
(38.8 L).
Emergency Alarm System : Model 9001.5, 1/2" 120 VAC
emergency alarm and light system. Buzzer and flashing
light are activated by a 1/2" IPS double pole, double throw
flow switch.
Dust Cover: Model 9102 is a stainless steel cover that
protects the eyewash heads as well as the bowl. (Picture
shows cover mounted to an eyewash.)
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 7360BT-7460BT wall mounted eye/face wash shall
include a stainless steel 11" (27.9 cm) round bowl, an
AXION® MSR eye/face wash head shall feature inverted
directional laminar flow which achieves Zero Vertical
Velocity󱃃 supplied by an integral 3.7 gpm flow control,
chrome-plated brass stay-open ball valve equipped with
stainless steel ball and stem, and chrome-plated brass in-line
50 x 50 mesh water strainer. Unit shall also include
cast-aluminum chromate protected wall bracket, drain trap
and tailpiece, yellow plastic pop-off dust cover for eyewash
head, tailpiece and trap, universal sign, 1/2" NPT inlet, and
1-1/2" NPT waste.
APPLICATIONS
Where the eyes and face of any person may be exposed to
injurious or corrosive materials, suitable facilities for quick
flushing of the eyes and face must be provided within the
work area for immediate emergency use. Emergency
eye/face wash facilities shall be in unobstructed and
accessible locations that require no more than 10 seconds for
the injured person to reach. Model 7360BT-7460BT is certified
by CSA to meet the ANSI Z358.1 Standard for Emergency
Eyewash and Shower Equipment.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 22 July, 2020
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.