Specification Sheet

model 7360B-7460B
AXION
®
MSR Wall Mount Eye/Face Wash
FEATURES & BENEFITS
QUALITY CONTROL
Eye/face wash and valve assembly is pre-built and fully
water/pressure tested to ensure no leaks and proper
function which ultimately reduces installation time and
gives the end contractor an added peace of mind. Unit
also ships with pre-assembled cast-aluminum wall bracket
to assist in the installation process.
BOWL
The 11" (27.9 cm) round stainless steel receptor is supplied
with a No. 2L bright finish on its exterior
STRAINERS/FILTERS
Chrome-plated brass in-line 50 x 50 mesh water strainer
prevents debris from reaching the eyewash so the unit
stays functioning at its best. Strainer is easily serviceable.
EYE/FACE WASH
AXION® MSR eye/face wash head (patent pending) uses
an inverted directional laminar flow to sweep
contaminants away from the vulnerable nasal cavity.
OPTIONS
Test Tag: SP170 is a green waterproof test card with space
for date and initials of inspector. Used to record weekly
testing of emergency equipment.
Waste Trap: Model SP95 chrome-plated brass trap with
tailpiece. 1-1/2" NPT.
Instantaneous Water Heater: Model TWBS.EW.H,
prepackaged instantaneous electrical water heater, 480
VAC/3 phase/20 kW, fully engineered and tested system
with fail-safe features to produce up to 6 gpm (22.7 L)
tempered water for eye washes.
Dust Cover: Model 9102 is a stainless steel cover that
protects the eyewash heads as well as the bowl. (Picture
shows cover mounted to an eyewash.)
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 7360B-7460B wall mounted eye/face wash shall
include a stainless steel 11" (27.9 cm) round bowl, an
AXION® MSR eye/face wash head shall feature inverted
directional laminar flow which achieves Zero Vertical
Velocity™ supplied by an integral 3.7 gpm flow control,
chrome-plated brass stay-open ball valve equipped with
stainless steel ball and stem, and chrome-plated brass in-line
50 x 50 mesh water strainer. Unit shall also include
cast-aluminum chromate protected wall bracket, yellow
plastic pop-off dust cover for eyewash head, universal sign,
1/2" NPT inlet, and 1-1/4" NPT waste.
APPLICATIONS
Where the eyes and face of any person may be exposed to
injurious or corrosive materials, suitable facilities for quick
flushing of the eyes and face must be provided within the
work area for immediate emergency use. Emergency
eye/face wash facilities shall be in unobstructed and
accessible locations that require no more than 10 seconds for
the injured person to reach.Model 7360B-7460B is certified by
CSA to meet the ANSI Z358.1 Standard for Emergency
Eyewash and Shower Equipment.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 23 February, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.