Specification Sheet

model 7501T
Tempered, Gravity-Fed, Portable Eyewash
FEATURES & BENEFITS
CONSTRUCTION
FDA approved high-density green polyethylene tank
provides the light and durable construction required in a
portable unit.
MOUNTING
J-shaped stainless steel wall bracket makes for a well
constructed portable mount for easy removal and
re-mount.
FLOW CONTROLS
Pulling down the eyewash arm will begin flushing the
9-gallon (34.1 L) portable tank at .4 gpm (1.5 L) for a full 15
minutes, creating a full patterned flushing of the eyes.
DESIGN
Tank comes complete with a wide-fill opening and
threaded cap for quick inspection, cleaning, and filling.
Unit also comes equipped with top and side handles
making relocation easy.
TEMPERED WATER
Heated, insulated blanket provides ANSI compliant
tempered potable water in operating temperatures to
-30° F (-34° C). Unit will stay tempered in non-extreme
outdoor conditions (below 100° F (38° C)). Only
tempered portable eyewash in the market.
OPTIONS
Water Additive: Model 9082, 'sterile' bacteriostatic
preservative for use in portable eyewash stations. One 5 oz.
(148 ml) bottle will preserve 5 to 20 gallons (18.9 to 75.7 L) of
potable water for up to three months. Four bottles per
carton.
Waste Container: Model 9009 is a twenty-gallon (75.7 L)
wastewater container constructed of tough yellow
polymer resin. Unit is used to collect water during weekly
testing of emergency equipment.
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 7501T is a 9-gallon (34 L), tempered, gravity-fed
portable eyewash with a NEMA 3R heated, insulated blanket
to provide ANSI compliant tempered potable water in
ambient operating temperatures to -30° F (-34° C) and
100° F (38° C). Ideal for remote locations without access to
continuous potable water. 120V, 50Hz electrical requirement
with supplied 8' GFCI power cord. Voltage and Haz Loc
options available. Model 9082 additive not included - order
separately.
APPLICATIONS
Where the eyes of any person may be exposed to injurious or
corrosive materials, when suitable facilities for quick flushing of
the eyes needs to be provided and a continuous supply of
water is not available. Although the 7501T may be installed in
a wide variety of locations, it is ideal for remote areas where
protective measures are still needed. Emergency eyewash
equipment shall be in unobstructed and accessible locations
that require no more than 10 seconds for the injured person to
reach. IAPMO EGS certified to ANSI/ISEA Z358.1 - CSA C22.2
No. 88, UL499 and UL 1951
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 26 July, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.