Specification Sheet

model 7501TH
Tempered, Gravity-Fed, Portable Eyewash (Haz Loc)
FEATURES & BENEFITS
CONSTRUCTION
FDA approved high-density green polyethylene tank
provides the light and durable construction required in a
portable unit.
MOUNTING
J-shaped stainless steel wall bracket makes for a well
constructed portable mount for easy removal and
re-mount.
FLOW CONTROLS
Pulling down the eyewash arm will begin flushing the
9-gallon (34.1 L) portable tank at .4 gpm (1.5 L) for a full 15
minutes, creating a full patterned flushing of the eyes.
DESIGN
Tank comes complete with a wide-fill opening and
threaded cap for quick inspection, cleaning, and filling.
Unit also comes equipped with top and side handles
making relocation easy.
TEMPERED WATER
Heated, insulated blanket provides ANSI compliant
tempered water in operating temperatures to -30° F
(-34° C). Unit will stay tempered in non-extreme outdoor
conditions (below 100° F (38° C)). Only hazardous
location tempered portable eyewash in the market.
Installed over the Haws model 7501.
HAZARDOUS LOCATION
Certification pending for hazardous locations Class I,
Division 2, Groups B, C, D, Temperature code T4; Class II,
Division 2, Groups F, G.
OPTIONS
Water Additive: Model 9082, 'sterile' bacteriostatic
preservative for use in portable eyewash stations. One 5 oz.
(148 ml) bottle will preserve 5 to 20 gallons (18.9 to 75.7 L) of
potable water for up to three months. Four bottles per
carton.
Waste Container: Model 9009 is a twenty-gallon (75.7 L)
wastewater container constructed of tough yellow
polymer resin. Unit is used to collect water during weekly
testing of emergency equipment.
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 7501TH is a 9-gallon (34 L), tempered, gravity-fed,
hazardous location portable eyewash with a Nema 4 heated,
insulated blanket to provide ANSI compliant tempered water
in ambient operating temperatures to -30° F (-34° C) . Ideal
for remote locations without access to continuous potable
water. 120V, 2A, 1 phase electrical requirement. Power cord
not provided - power connection must be made according
to code using Class I Division 2 compliant equipment. Voltage
options available. Model 9082 additive not included - order
separately.
APPLICATIONS
Where the eyes of any person may be exposed to injurious or
corrosive materials, when suitable facilities for quick flushing of
the eyes needs to be provided and a continuous supply of
water is not available. Although the 7501TH may be installed
in a wide variety of locations, it is ideal for remote areas
where protective measures are still needed. Emergency
eyewash equipment shall be in unobstructed and accessible
locations that require no more than 10 seconds for the injured
person to reach. Built with CSA certified components, and
compliant to ANSI Z358.1
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 25 January, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.