Specification Sheet

model 7777
AXION
®
MSR Corrosion Resistant Pedestal Eye/Face Wash
FEATURES & BENEFITS
CONSTRUCTION
1-1/4" Type 304 Stainless Steel pipe and fittings along with
cast finished stainless steel 9" (22.9 cm) diameter floor
flange provide a superior defense in a highly corrosive
environment.
VALVES
Type 316 Stainless Steel ball valve is designed to make the
flushing of fluid occur with the simple push of a stainless
steel flag, and is equipped with a stainless steel ball and
stem to provide a superior protection against corrosion
and breakage.
STRAINERS/FILTERS
Type 304 Stainless Steel in-line 50 x 50 mesh water strainer
supplies added protection against corrosion and prevents
debris from reaching the eye/face wash so the 8330 stays
functioning at its best. Strainer is easily serviceable. Stainless
steel dust cover protects eye/face wash head as well as
bowl up until the last second before use further optimizing
operation.
SAFETY
8" x 10-3/4" (20.3 x 27.3 cm) universal emergency sign make
the unit easily detected in an emergency. Test card to
record weekly checks helps maintain the unit󰾺s best
working quality.
EYE/FACE WASH
AXION® MSR eye/face wash head (patent pending) uses
an inverted directional laminar flow to sweep
contaminants away from the vulnerable nasal cavity.
OPTIONS
Test Tag: SP170 is a green waterproof test card with space
for date and initials of inspector. Used to record weekly
testing of emergency equipment.
Dust Cover: Model 9102 is a stainless steel cover that
protects the eyewash heads as well as the bowl. (Picture
shows cover mounted to an eyewash.)
Foot Treadle : Model SP220SS foot control assembly,
including chain, clamp, nut, ring, screw, spring and
stainless steel treadle.
Thermostatic Mixing Valve: Model 9201EFE AXION®
Emergency Tempering Valve thermostatically mixes hot
and cold water to provide a safe fluid supply for a single
emergency eye/face wash, with a flow rate of 12 gpm
(38.8 L).
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 7777 stainless steel pedestal-mounted eye/face wash
shall include a stainless steel 11" (27.9 cm) round bowl, an
AXION® MSR eye/face wash head with inverted directional
laminar flow which achieves Zero Vertical Velocity󱃃
supplied by an integral 3.7 gpm flow control, Type 316
stainless steel ball valve equipped with stainless steel ball and
stem, and Type 304 stainless steel in-line 50 x 50 mesh water
strainer. Unit shall also include Type 304 pipe and fittings,
stainless steel floor flange, yellow plastic dust cover, universal
sign, 1/2" NPT inlet, and 1-1/4" NPT waste.
APPLICATIONS
In an environment where materials need to withstand the
greatest corrosion, where eyes and face of any person may
be exposed to these injurious or corrosive materials, suitable
facilities for quick drenching or flushing of the eyes and face
shall be provided within the work area for immediate
emergency use. Emergency eye/face wash facilities shall be
in unobstructed and accessible locations that require no
more than 10 seconds for the injured person to reach. Model
7777 is certified by CSA to meet the ANSI Z358.1 Standard for
Emergency Eyewash and Shower Equipment.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 07 April, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.