Specification Sheet

model H1011.8HO
Barrier-Free Wall Mounted Electric Water Cooler
FEATURES & BENEFITS
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button valve
assembly which allows for front access stream adjustment
as well as cartridge and strainer access, this fountain offers
the ultimate in ease of maintenance.
BARRIER-FREE
Barrier-free capabilities combined with its ease of use
allows for a number of installation location possibilities.
QUALITY CONTROL
Both fountains are pre-built and fully water and pressure
tested to ensure no leaks and proper function for reduced
installation time and added peace of mind.
HANDS-FREE OPERATION
Electric sensor allows for operation simply by moving in
front of fountain, eliminating the need for manual
activation under a number of circumstances.
CONSTRUCTION
18 gauge Type 304 Stainless Steel fountain with attractive
and functional swirl bowl design, along with a
vandal-resistant bottom plate provides a long lasting unit
with added peace of mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head with integral
laminar flow prevents splashing and provides a superior
flow pattern. The integral basin shank and inserted roll pin
adds vandal resistance strength to the design, and the
shielded angled stream orifice produces a steady sanitary
source of water.
MOUNTING
Heavy-duty galvanized steel mounting frame provides the
sturdy hidden support needed for the "Hi-Lo" configuration
of this unit. Further convenience is given to the chiller with
the integral fold-out shelf.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Cane Touch Skirt: Model SK3, satin finish stainless steel cane
touch skirt for installation on high unit to comply with ADA
protruding objects guidelines.
Premier Polymarble: Standard stainless steel bowl can be
modified to polymarble, with a variety of finishes available
including Gray Granite, Aurora Granite, Smoky Pearl, and
Expresso.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model H1011.8HO electric "Hi-Lo" wall mounted barrier-free
drinking fountain shall include dual 18 gauge Type 304
Stainless Steel satin finish basins with integral swirl design, 14
gauge Type 304 Stainless Steel wall bracket, push-button
operated valves with front-accessible cartridge and flow
adjustment with one basin and a "hands-off" electric sensor
activated valve on the other, polished chrome-plated brass
vandal-resistant bubbler heads with integral laminar
anti-squirt flow, chrome-plated brass vandal-resistant waste
strainer, vandal-resistant bottom plates, stainless steel satin
finish back panel and louvered intrusion-proof grill, high and
low fountain mounting levels, and 1-1/4" O.D. waste pipes.
The R-134a refrigeration system is hermetically sealed and
delivers a minimum of 8 gph (30.3 lph) of water at 50°F
(10°C) cooled from 80°F (26.7°C) inlet water at 90°F
(32.2°C) ambient. 115 Volts, 60Hz, rated watts: 370, full load
amps: 5.
APPLICATIONS
Specifically, this type fountain may be placed in settings such
as: schools, office buildings, shopping malls, and other indoor
environments where there is a demand for a chilled water
source and/or wheel chair access.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Electric
water coolers are not recommended or designed for outdoor
applications or enclosed pool areas (chlorine). These
conditions may void warranty. Haws manufactures drinking
fountains, electric water coolers and electric drinking
fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65,
and the Federal Safe Drinking Water Act. Haws electric water
coolers comply with ARI Standard 1010 and ANSI A117.1, and
be listed by Underwriter Laboratories to U.S. and Canadian
standards. Product is compliant to California Health and
Safety Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.