Specification Sheet

model H1107.8
Barrier-Free Wall Mounted Electric Water Cooler
FEATURES & BENEFITS
CONSTRUCTION
Heavy-duty 14 gauge Type 304 Stainless Steal construction
with integral mounting plates for extra durability. Unit
also includes vandal-resistant bottom plates for added
peace-of-mind.
BUBBLER HEAD
Polished chrome-plated brass bubbler head features an
integral basin shank for added strength, and is equipped
with a shielded, anti-squirt orifice that provides a steady
sanitary source of water.
BACK PANEL
Stainless steel back panel helps to protect the wall from
inadvertent splashing, and its decorative satin finish
increases location visibility and completes the fountains
attractive appearance.
INTEGRATED TRAP
Spacious fountain design allows for the trap to be internally
mounted which allows for easy access, and aids and
reduces the installation process.
QUALITY CONTROL
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced
installation time and added peace of mind.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
ANTIMICROBIALLY TREATED
Specific components are antimicrobially treated using the
natural protection of silver. Silver helps protect against the
growth of mold and mildew on the treated components.
Treated surfaces include bubbler head, push button, waste
strainer and trap.
PUSH BUTTON
With its patented (Pat.# 6,981,692) push-button stainless
steel valve assembly which allows for front access stream
adjustment as well as cartridge and strainer access, this
fountain offers 100% lead free waterways.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Premier Colors: Nine powder-coated colors, (green, silver,
red, blue, black, brown, orange, yellow and white),
available for an additional charge.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model H1107.8 electric wall mounted barrier-free drinking
fountain shall include a 14 gauge Type 304 Stainless Steel
satin finish basin, antimicrobially treated bubbler head, push
button, waste strainer and trap to protect against the growth
of mold and mildew on the treated components. Push-button
operated stainless steel valve with front-accessible cartridge
and flow adjustment, 100% lead-free waterways, polished
chrome-plated brass vandal-resistant bubbler head, and a
polished chrome-plated brass vandal-resistant waste strainer.
Unit shall also include a vandal-resistant bottom plate, satin
stainless steel back panel and louvered intrusion-proof grill,
and 1-1/4" IPS trap. Unit can be mounted to meet ADA or
Child ADA specifications. The R-134a refrigeration system is
hermetically sealed and delivers a minimum of 8 gph (30.3
lph) of water at 50°F (10°C) cooled from 80°F (26.7°C)
inlet water at 90°F (32.2°C) ambient. 115 Volts, 60Hz, rated
watts: 370, full load amps: 5.
APPLICATIONS
Specifically, this type fountain may be placed in settings such
as: schools, office buildings, shopping malls, and other indoor
environments where there is a demand for a chilled water
source and/or wheel chair access.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Electric
water coolers are not recommended or designed for outdoor
applications or enclosed pool areas (chlorine). These
conditions may void warranty. Haws manufactures drinking
fountains, electric water coolers and electric drinking
fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65,
and the Federal Safe Drinking Water Act. Haws electric water
coolers comply with ARI Standard 1010 and ANSI A117.1, and
be listed by Underwriter Laboratories to U.S. and Canadian
standards. Product is compliant to California Health and
Safety Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.