Installation Instructions

EXISTING SHOWER HEAD
(SHORT NOZZLE TYPE WITH EXTERNAL FLOW CONTROL
MAY OR MAY NOT INCLUDE SHROUD)
STYLE B
EXISTING SHOWER HEAD
(SHROUD TYPE WITH INTEGRAL FLOW CONTROL)
STYLE A
PIPE NIPPLE
(SHOWN FOR REFERENCE)
FLOW CONTROL REMOVAL FROM EXISTING SHOWER
(APPLIES ONLY TO SHOWERS WITH A SHORT NOZZLE
SHOWER HEAD - SEE STYLE B)
DETAIL A
REMOVE 20 GPM FLOW CONTROL
ASSEMBLY (LOCATED
INSIDE 1" NIPPLE ON OUTLET
SIDE OF VALVE)
VALVE
(SHOWN FOR REFERENCE)
20 GPM
FLOW CONTROL
1 IF NECESSARY, USE DOW CORNING 832 SEALANT, PLACING 5 SMALL BEADS ON THE MALE
THREADS OF MATING PART (JUST ABOVE THE FIRST THREAD) BEFORE ASSEMBLING HEAD.
2 REPLACEMENT INSTRUCTIONS FOR EXISTING SHOWER HEADS SHOWN ABOVE:
STYLE A) IF EXISTING HEAD IS SHROUD TYPE WITH INTERNAL FLOW CONTROL; REPLACE
WITH NEW SP829 HEAD. NO OTHER MODIFICATIONS ARE REQUIRED.
STYLE B) IF EXISTING HEAD IS SHORT NOZZLE TYPE (MAY OR MAY NOT HAVE A SHROUD ATTACHED)
A 20 GPM FLOW CONTROL IS PRESENT INSIDE OVERHEAD NIPPLE AND MUST BE REMOVED
PRIOR TO INSTALLING NEW SP829 SHOWER HEAD.
(SEE DETAIL A)
NOTES:
SHORT
NOZZLE
SHROUD
SP829 AXION SHOWER HEAD
(WITH INTEGRAL 20GPM
FLOW CONTROL)
1
2
2
APPROVED:
DRAWN:
PART NUMBER
DRAWING NO.
SCALE:
SHEET OF
REV
DRAWING TYPE: SIZE: A
BY:ECN NO.
PA
G
E
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
IR 5/22/08
15351A00 7
0002080268
SP829 AXION SHOWER HEAD
3:2
11
4111
HM
1
o
f 1
INSTALLATION
4723
2012