PC Card Reference Guide

DIVA T/A PC Card Reference Guide 30
ISDN Configuration Commands—Continued
Command Description
AT!C1=n
AT!C11=n
(continued)
For International Firmware
n=2
EuroISDN (default)
n=3
TPH (Australia).
n=4
INS-Net64 (Japan).
n=254
Enables the alternate switch type with the same
value as the primary switch type.
AT!C2=n AutoSPID Storage Location: Sets the ISDN
AutoSPID storage location to Primary or
Alternate (North American version only).
n= 0 Primary (default)
n=1 Alternate
Note:
This parameter is static. Changes do not
take effect until you restart your DIVA T/A
.
AT!C4=n
AT!C41=n
Enable/Disable Non-Initializing mode (first B-
channel): Specifies whether the first B-channel in
the ISDN primary (AT!C4) or alternate (AT!C41)
ISDN settings is set to Non-Initializing mode
(North American version only).
n=0
Disable Non-initializing mode (default)
n=1
Enable Non-initializing mode
Note:
These parameters are static. They do not
take effect until you restart your DIVA T/A.