Harrier 41 410D (Push) CODES 412D 413D Variable Speed Variable Speed (Electric Start) (Auto Drive) OWNER'S HANDBOOK (English Version) CODE SERIAL NO. 410D 260000001 412D 260000001 413D 260000001 Issue : 08.11.05 HANDBOOK: 111-0434 (Rev.A.
MAIN FEATURES /SPECIFICATIONS Main Features Air Cleaner Fuel Filler Cap Oil Filler Cap and Dipstick Handlebar Securing Knob Engine Start-Grip Throttle Control. Engine Stop lever. Handlebar Ground Drive Clutch Lever (412 & 413 Only) Variable Speed Control (412 & 413 Only) Grassbag Assembly 4 Height of Cut Adjuster 13 Serial No.
1ST Year (12 months) We certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Year (12 months) Owner’s Name: Serial Number: Date: Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) We certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 2nd Year (24 months) Owner’s Name: Serial Number: Date: Note for dealer: Please retain this voucher for your records.
CONTENTS 1.2 Main Features/Specifications 1.20 Maintenance Schedule 1.5 Contents 1.6 Introduction 1.7 Warranty 1.8 - 1.11 1.8 1.8 1.8 1.9 1.9 1.10 1.10 1.11 1.11 1.11 Safety Precautions Safety Alert Symbol Training Preparation Preparation Operation Operation Maintenance & Storage Maintenance & Storage Safety Symbols Control Symbols 1.12 Assembling the Mower 1.12 - Delivery Checklist 1.12 - Handlebar 1.12 - Grassbag Attachment 1.21 - 1.28 Mower Maintenance 1.21 - Engine 1.
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your machine. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance.
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network.
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay particular attention to the safety precautions.
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleaning/checking or working on the mower.
SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cutterblade.
ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Grassbag. 2. Charger (412 Only) 3. Ignition Key (412 Only) To prevent accidents cut off the long ribbon attached to the grassbag and discard. Note: Prior to first time use please fully charge the battery for 14 hours.
BEFORE STARTING THE MOWER Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Check Oil Level 0.15 Litres ADD Clean around the oil filler cap before removing. With the mower on a level surface, unscrew and remove the oil filler - dipstick. Wipe oil from it with a clean cloth.
OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before starting a cold engine.
OPERATING THE MOWER Electric Start (412 Only) - Stand behind the mower and hold the handlebar together with the engine stop lever. Turn the ignition key in a clockwise direction and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine. Note: cranking the engine for more than 15 seconds in any one minute can damage the starter motor.
OPERATING THE MOWER Slopes To prevent engine damage do not use the mower on slopes greater than 20 degrees. Height of Cut Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings. 305113 Always select a height of cut to suit operating conditions.
OPERATING THE MOWER Without Grass Collection Remove the grassbag and operate the mower with the rear deflector in the closed position. Heavy Growth Areas of heavy growth should be mown without collecting the clippings. If collection is required, first mow the area without the grassbag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted.
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made.
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weather conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand.
MAINTENANCE SCHEDULE To prevent accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. After the very first hour check clutch adjustment. See page 1.22. After the very first five hours change the engine oil. Follow the hourly or calendar intervals, whichever occurs first.
MOWER MAINTENANCE 100Hrs or Every Season Clean the engine cooling system. Clean more often under dusty conditions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass. Replace the spark plug. Engine 3 2 4 GS BRIG & TTON STRA Air Filter Fuel Cap Start Grip Oil Cap/ Dipstick Exhaust Guard Spark Plug / Lead R IE RR A H 41 1. 2. 3. 4. 5. 6.
MOWER MAINTENANCE Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:1. Drain fuel by running the engine until the fuel tank is empty. 2. Remove the spark plug lead. 3. Allow the engine to cool. 4. Drain the oil while the engine is warm.(Not hot) 5.
MOWER MAINTENANCE Spark Plug Service Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer. 1 Check the spark plug gap with a feeler gauge and set at 0.76mm.
MOWER MAINTENANCE Deck Housing Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and store well away from corrosive materials. Securing Nuts & Bolts Regularly check that all securing nuts and bolts are tight. Replace missing or damaged items immediately.
MOWER MAINTENANCE Lubrication Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Cutterblade Removal Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to cool. Turn the mower on its left hand side and ensure that the air cleaner side of the engine is uppermost.
MOWER MAINTENANCE Cutterblade Assembly Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), and distance piece (3) and tighten to a torque of 54Nm 1 2 3 Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require.
MOWER MAINTENANCE Storage BRIGGS & STRATTON IER RR HA 41 To store the handlebar unscrew the 2 small securing knobs sufficiently to allow it to be pivoted forwards to rest against the mower. Take care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine spark plug.
MOWER MAINTENANCE Battery charging (412 only) - PREVENT ACCIDENTS: ALWAYS charge the battery in a well ventilated area. NEVER charge the battery near naked flames or direct heat. ALWAYS switch off the mains electricity supply before disconnecting the charger from the battery. ALWAYS use the battery charger supplied with the mower. Battery charging should not be necessary during normal use. The engine operation will automatically charge the battery.
TROUBLE SHOOTING PROBLEM POSSIBLE FAULT REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever. Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Battery discharged (412 Only) Charge battery Excess oil level. Check oil level. Air cleaner cartridge oil soaked or blocked. Service air cleaner. Fuel starvation. Fill fuel tank. Fuel cap vent blocked. Clean fuel cap vent. Engine under load. Raise height of cut. Fuel starvation.
TROUBLE SHOOTING PROBLEM POSSIBLE FAULT REMEDY Engine vibrates excessively Mounting bolts loose. Tighten bolts Cutterblade bolt loose. Tighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft.
DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY HAYTER LIMITED, Spellbrook, Bishopʼs Stortford, Herts CM23 4BU ENGLAND declare that the lawnmowers: Model: Harrier 41 Harrier 41 Harrier 41 Model No: Category: Type: Engine - Manufacturer - Speed of Rotation Cutting width: Speed of rotation of the cutting device: CODE 410D Push Pedestrian Rotary Briggs & Stratton 3000 rpm 410 mm CODE 412D Electric Start Pedestrian Rotary Briggs & Stratton 3000 rpm 410 mm CODE 413D Auto Drive Pedestrian Rotary
PARTS LIST QTY. ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1.32 DESCRIPTION PART NO.
PARTS LIST QTY. ITEM NO.
PARTS LIST QTY. ITEM NO. 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 1.34 DESCRIPTION PART NO.
410C PARTS LIST 31 33 28 42 23 25 24 30 34 30 28 114 24 37 27 115 8 BRIGGS R IE RR A H 41 & ON STRATT 20 18 13 19 7 13 38 17 16 39 17 15 13 9 15 14 10 14 16 5 70 36 9 11 4 19 10 12 2 40 70 3 3 19 20 43 41 3 45 44 1 45 3 45 79 3 46 3 116 111 24 47 3 54 3 65 48 3 3 49 68 3 3 76 82 71 3 90 101 80 84 91 78 96 3 96 81 106 100 74 107 96 105 91 86 90 98 109 83 85 95 99 87 97 102 3 70 103 108 104 94 105 108 106 3 3 3 110 107 1C41
412C/413C PARTS LIST 31 32 33 28 42 23 25 34 30 30 28 26 24 27 8 BRIGGS R IE RR A H 41 & ON STRATT 20 18 22 13 19 23 24 24 114 21 7 115 13 35 37 38 37 17 16 39 17 36 15 13 9 15 14 10 14 16 5 70 36 9 11 4 19 10 12 2 40 70 3 3 19 20 43 41 3 45 44 1 45 3 45 79 3 46 3 116 111 51 47 113 50 54 10 3 3 49 6 52 55 57 58 56 3 112 3 29 53 48 62 24 60 59 3 65 61 67 63 68 64 70 76 71 82 72 3 90 101 66 69 3 80 77 73 3 75 91 72 3
NOTES Notes:- 1.
NOTES Notes:- 1.
NOTES Notes:- 1.
CUSTOMER INFORMATION Serial No: Engine Type:-12F802-1325-01 Engine Type:-12F807-1324-01 Date of Sale:Your Local Dealer:- 1.