415022 (0) 10/3/05 11:35 am Page 1.1 Ranger 41 Push CODE 415C OWNER'S HANDBOOK (English Version) FROM SERIAL NO: 415C001001 Issue : 21.02.05 HANDBOOK: 415022 (Rev.0.
415022 (0) 10/3/05 MAIN 11:35 am Page 1.2 FEATURES /SPECIFICATIONS Main Features 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Air Cleaner Fuel Filler Cap Oil Filler Cap and Dipstick Handlebar Securing Knob Engine Start-Grip Throttle Control. Engine Stop lever. Handlebar Grassbag Assembly Height of Cut Adjuster Serial No.
415022 (0) 10/3/05 11:35 am Page 1.3 1ST Year (12 months) We certify that this service has been carried out by an Authorised Hayter Service Dealer Date: 1ST Year (12 months) Owner’s Name: Serial Number: Date: Note for dealer: Please retain this voucher for your records.
15022 (0) 10/3/05 11:35 am Page 1.5 CONTENTS 1.2 Main Features/Specifications 1.20 Maintenance Schedule 1.5 Contents 1.6 Introduction 1.7 Warranty 1.8 - 1.11 Safety Precautions 1.11 Safety Symbols 1.11 Decal Symbols 1.12 Assembling the Mower 1.12 - Delivery Checklist 1.12 - Handlebar 1.12 - Grassbag Attachment 1.13 Before Starting the Engine 1.13 - Prevent Engine Damage 1.13 - Oil Type 1.13 - Check Oil Level 1.13 - Fuel Type 1.14 - 1.17 Operating The Mower 1.14 - Controls 1.14 - Starting Step 1 1.
415022 (0) 10/3/05 11:35 am Page 1.6 INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time.
415022 (0) 10/3/05 11:35 am Page 1.7 WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network.
415022 (0) 10/3/05 11:35 am Page 1.8 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay particular attention to the safety precautions.
415022 (0) 10/3/05 11:35 am Page 1.9 SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
415022 (0) 10/3/05 11:35 am Page 1.10 SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute.
415022 (0) 10/3/05 11:35 am Page 1.11 SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.
415022 (0) 10/3/05 11:35 am Page 1.12 ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. To prevent accidents cut off the long ribbon attached to the grassbag and discard. Handlebar & STRATTON R BRIGGS IE RR HA 41 Unscrew the handlebar securing knobs sufficiently to allow the handlebar to pivot.
415022 (0) 10/3/05 11:35 am Page 1.13 BEFORE STARTING THE MOWER Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Check Oil Level 0.15 Litres ADD Clean around the oil filler cap before removing. With the mower on a level surface, unscrew and remove the oil filler - dipstick. Wipe oil from it with a clean cloth.
415022 (0) 10/3/05 11:35 am Page 1.14 OPERATING THE MOWER Controls Check that the engine stop lever returns freely to its rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before starting a cold engine. Move the throttle control lever to the ‘fast’ position before starting a warm engine.
415022 (0) 10/3/05 11:35 am Page 1.15 OPERATING THE MOWER Turning To turn steer the mower with the handlebar in the direction required. To make a tight turn, apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction. To prevent accidents do not raise the front of the mower excessively when making a turn. Never raise the rear of the mower when the engine is running. Stopping Release the engine stop lever.
415022 (0) 10/3/05 11:35 am Page 1.16 OPERATING THE MOWER Before Mowing To prevent accidents thoroughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous projectiles. Inspect the area for hidden obstructions which when contacted by the cutterblade could risk health and safety. Remember the location of these obstructions and ensure that you mow around them.
415022 (0) 10/3/05 11:35 am Page 1.17 OPERATING THE MOWER Friction Disc The cutterblade is driven by the engine via a friction disc to help prevent damage occurring to the engine crankshaft and cutting mechanism when a hidden obstruction or overload is encountered. Always stop the engine when a hidden obstruction or excessive vibration is encountered. Disconnect the spark plug lead and examine the cutting mechanism. ALWAYS replace a damaged cutterblade - refer to “Maintenance”.
415022 (0) 10/3/05 11:35 am Page 1.18 LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made.
415022 (0) 10/3/05 11:35 am Page 1.19 LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weather conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand.
415022 (0) 10/3/05 11:35 am Page 1.20 MAINTENANCE SCHEDULE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. After the very first five hours change the engine oil. Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass.
415022 (0) 10/3/05 11:35 am Page 1.21 MOWER MAINTENANCE To prevent accidents stop the engine and disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Engine 3 2 4 BRIG GS & TTON STRA Air Filter Fuel Cap Start Grip Oil Cap/ Dipstick Exhaust Guard Spark Plug / Lead R IE RR A H 41 1. 2. 3. 4. 5. 6. 1 6 5 Throttle Cable Adjustment Loosen casing clamp screw (1) and move the governor lever (2) in the direction of screw (1) as far as posible.
415022 (0) 10/3/05 11:35 am Page 1.22 MOWER MAINTENANCE Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:1. 2. 3. 4. 5. Drain fuel by running the engine until the fuel tank is empty. Remove the spark plug lead. Allow the engine to cool.
415022 (0) 10/3/05 11:35 am Page 1.23 MOWER MAINTENANCE Spark Plug Service Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer. 1 Check the spark plug gap with a feeler gauge and set at 0.76mm.
415022 (0) 10/3/05 11:35 am Page 1.24 MOWER MAINTENANCE Deck Housing Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings are particularly corrosive. Thoroughly clean the mower deck immediately after use on treated grass and store well away from corrosive materials. Securing Nuts & Bolts Regularly check that all securing nuts and bolts are tight. Replace missing or damaged items immediately.
415022 (0) 10/3/05 11:35 am Page 1.25 MOWER MAINTENANCE Cutterblade Removal Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to cool. Turn the mower on its left hand side and ensure that the air cleaner side of the engine is uppermost. Firmly grip the end of the cutterblade with the gloved hand and remove the bolt, spring washer and distance piece securing the cutterblade with a 9 16 ” A/F spanner.
415022 (0) 10/3/05 11:35 am Page 1.26 MOWER MAINTENANCE Cutterblade Assembly Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), and distance piece (3) and tighten to a torque of 54Nm 1 2 3 Cutterblade Sharpening 30°-45° A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance.
415022 (0) 10/3/05 11:35 am Page 1.27 MOWER MAINTENANCE Storage BRIGGS & STRATTON IER RR HA 41 To store the handlebar unscrew the 2 small securing knobs sufficiently to allow it to be pivoted forwards to rest against the mower. Take care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine spark plug.
415022 (0) 10/3/05 11:35 am Page 1.28 TROUBLE SHOOTING PROBLEM POSSIBLE FAULT REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever. Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Excess oil level. Check oil level. Air cleaner cartridge oil soaked or blocked. Service air cleaner. Fuel starvation. Fill fuel tank. Fuel cap vent blocked. Clean fuel cap vent. Engine under load. Raise height of cut. Fuel starvation.
415022 (0) 10/3/05 11:35 am Page 1.29 TROUBLE SHOOTING PROBLEM POSSIBLE FAULT REMEDY Engine vibrates excessively Mounting bolts loose. Tighten bolts Cutterblade bolt loose. Tighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft.
415022 (0) 10/3/05 11:35 am Page 1.30 DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY HAYTER LIMITED, Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND declare that the lawnmowers: Models: Machine Type No.
415022 (0) 10/3/05 11:35 am Page 1.31 PARTS ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 DESCRIPTION PART NO. QTY.
415022 (0) 10/3/05 11:35 am Page 1.32 PARTS LIST ITEM NO. 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 1.32 DESCRIPTION PART NO.
415022 (0) 10/3/05 11:35 am Page 1.
415022 (0) 10/3/05 11:35 am NOTES Notes:- 1.34 Page 1.
415022 (0) 10/3/05 11:35 am Page 1.35 NOTES Notes:- 1.
415022 (0) 10/3/05 11:35 am CUSTOMER Page 1.36 INFORMATION Serial No: Engine Type:-12F802-1325-01 Engine:-Briggs & Stratton Quantum XTS 50 Date of Sale:Your Local Dealer:- 1.
