User Guide

Remove grass debris from the top and underside of the deck housing
immediately after use.
Fertilisers and top dressings are particularly corrosive.
Thoroughly clean the mower deck immediately after use on treat-
ed grass and store well away from corrosive materials.
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
At any time the operator feels that the machine is loosing drive:
1. Stop the engine.
2. Pull the machine backwards at the same time progressively
engage the clutch lever until the rear rollers lock, at this point the
clutch lever should be 60mm from the handlebar. Refer to Fig 1.
1.26
60mm
1CG480V36B
Securing Nuts & Bolts
Deck Housing
Clutch Cable Adjustment
MOWER
MAINTENANCE
Fig 1
111-1471 (C) 29/8/08 12:56 pm Page 1.26