- M10/30 HERITAGE TRACTOR CODE133A INSTRUCTION BOOK FROM SERIAL NO:133A001001 F-030609L MANUAL PART NO: 133009(REV.0. 
- 1 3 2 1 6 7 2 4 (17x47) 5 (1001054) 3 6 1 2 4 3 7 4 5 2 3 1 8 (26x270) 2 8 (26x270) 1 6 (2x82) 5 6 4 3 2 6 (2x82) 1 8 4 6 7 (14x79) 5 5 3 7 2 F-0 30609L 2 4 
- 8 7 1 8 9 1 7 10 9 6 2 7 12 11 1 4 5 F-0 30609L 3 
- 13 14 1 1 2 3 2 3 16 15 2 3 1 7 4 6 5 1 2 4 3 7 17 18 1 3 2 2 5 6 4 3 F-0 30609L 4 
- 20 19 1 2 1 5 3 3 2 4 22 21 1 4 5 3 23 F-0 30609L 5 
- 24 2 3 5 1 4 5 25 5 6 26 10 12 11 4 7 4 9 8 6 3 2 7 1 13 2 F-0 30609L 6 
- 27 7 10 8 10 1 6 11 4 3 3 7 9 4 5 5 F-0 30609L 7 
- 28 1 2 3 MAX + 90N 10 9 8 7 6 5 4 MAX + 150N 11 12 14 13 29 1 10 2 4 3 11 12 5 6 7 13 14 15 8 9 30 327349 F-0 30609L 1001054 17x47 2x82 14x79 8 26x270 
- GB LIMITED WARRANTY Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engine furnish their own warranty and services are provided through their authorised network (Refer to “Engine Warranty Statement”). 
- GB CONTENTS LIMITED WARRANTY 9 INTERNATIONAL PICTORIALS 10 OWNER’S INFORMATION 11 SAFE OPERATION PRACTICES 11 ASSEMBLY 12 OPERATION 13 MAINTENANCE 15 TROUBLE SHOOTING CHART 18 INTERNATIONAL PICTORIALS IMPORTANT: The following pictorials are located on your unit or on literature supplied with the product. Before you operate the unit, learn and understand the purpose for each pictorial. NOTE: Illustrations and pictorials begin on page 2. 
- GB OWNER’S INFORMATION Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an accident, follow the operating instructions and the safety rules. Keep this manual for future reference. 2. 3. WARNING: Look for this symbol to indicate important safety precautions. 
- GB ASSEMBLY Maintenance Free Battery (Figure 5) Check The Tyres All fasteners are in the parts bag. Do not discard any parts or material until the unit is assembled. IMPORTANT: Before you attach the battery cables to the battery, check the battery date. The battery date tells if the battery must be charged. Check the air pressure in the tyres. Tyres with too much air pressure will cause the unit to ride rough. Also, the wrong air pressure will keep the mower housing from cutting level. 
- GB OPERATION NOTE: Illustrations and pictorials begin on page 2. Location Of Controls (Figure 6) Blade Rotation Control (1): Use the blade rotation control to start and stop the rotation of the blade. Clutch / Brake Pedal (2): The pedal has two functions. The first function is a clutch. The second function is a brake. Ignition Switch (3): Use the ignition switch to start and stop the engine. Shift Lever (4): Use the shift lever to change the speed of the unit. 
- GB 5. Push the clutch/brake pedal completely forward. 6. Move the shift lever to one of the speed settings. NOTE: When you mow in heavy grass or mow with a bagger, put the shift lever in the slowest speed. 7. Slowly release the clutch/brake pedal. 8. Move the throttle control to the FAST position. If you need to go faster or slower, stop the unit and move the shift lever to another speed setting. 9. Make sure the level of cut is still correct. After you mow a short distance, look at the area that was cut. 
- GB MAINTENANCE CHART FREQUENCY MAINTENANCE REQUIRED COMMENTS Daily or before each use Maintenance engine. Refer to the Engine Owner’s Manual. Examine blade(s). Check for cracks, wear, and excessive damage. Remove debris from unit and mowing area. Examine all rotating and sliding parts. Check tire inflation. Refer to the Maintenance section. Verify that the mower housing is level. Refer to the Maintenance section. Examine V-belts. Check for cracks, wear, and excessive damage. 
- GB ting performance decreases or the quality of cut is poor, make the following changes. How To Check And Adjust The Clutch (Figure 18) 1. When you mow, make sure the throttle control is in the FAST position. If the motion drive belt is loose, the clutch will slip when; going up a hill, pulling a heavy load, or the unit will not move forward. Adjust the clutch as follows. 2. (Figure 8) Move the blade rotation control (1) to the DISENGAGE position (8). 3. Stop the engine. Disconnect the spark plug lead. 
- GB 7. (Figure 22) Raise the lift lever (1) from the LEVEL ADJUSTMENT position (2) to a CUTTING HEIGHT position (3). 8. Close the cover (5). 9. Mow for a short distance. If the height of cut is not level, repeat the above steps. CAUTION: Do not operate with the mower housing in the LEVEL ADJUSTMENT position (2). If you operate in the LEVEL ADJUSTMENT position (2), the mower housing and blade will be damaged. Where To Lubricate (Figure 23) Models with grease fittings: Lubricate with grease gun. 
- GB 3. Clean the air filter. 4. Replace the fuel filter. 7. Clean the extension tube and the connector tube (applies only to model with rear discharge grass bag). 1. Follow the steps, “How To Start The Engine” in this book. PROBLEM: The engine stops when the blades are engaged. PROBLEM: The mower housing does not cut level. 2. Electric-Start Models: Clean the battery terminals. Tighten the cables. 1. Check the wiring harness for damage or a loose connection. Repair the damaged wire. 3. 
- F-0 30609L 19 
- CODE 133A REPAIR PARTS CHASSIS & HOOD 45 1 5 6 7 10 2 11 12 3 18 20 21 19 17 11 8 23 4 16 16 24 22 34 31 13 14 29 25 15 26 30 32 33 43 27 28 19 47 44 13 20 42 41 36 13 46 40 37 39 F-0 30609L 20 
- CODE 133A Key No. REPAIR PARTS CHASSIS & HOOD Description Part No. Key No. 1 Seat 690566 2 Hood 3 Description Part No. 
- CODE 133A REPAIR PARTS MOTION DRIVE 5 4 72 3 2 9 5 10 14 12 11 8 13 7 15 11 6 23 58 22 24 1 16 17 18 20 19 34 11 25 21 16 15 26 15 27 13 31 15 30 28 30 29 38 39 32 33 34 34 40 35 37 41 54 55 10 11 56 42 43 44 36 45 46 47 63 73 57 48 10 59 60 49 62 52 15 13 52 15 50 61 67 64 51 49 69 65 54 15 66 F-0 30609L 50 53 64 70 51 13 68 22 53 
- CODE 133A Key No. 1 * ** REPAIR PARTS MOTION DRIVE Description Engine, Briggs & Stratton Part No. ----- Key No. 37 Description Rod, Clutch Part No. 
- CODE 133A REPAIR PARTS STEERING 2 4 1 36 5 37 3 7 8 9 4 32 22 11 10 12 19 13 10 12 30 34 35 33 23 9 14 31 15 9 16 26 25 17 17 18 9 14 29 20 24 28 27 F-0 30609L 9 24 21 
- CODE 133A Key No. * REPAIR PARTS STEERING Description Part No. Key No. Description Part No. 
- CODE 133A REPAIR PARTS MOWER HOUSING SUSPENSION 2 1 13 3 5 4 14 6 5 5 15 8 16 7 4 10 9 11 31 12 17 9 24 18 25 13 19 23 26 22 21 27 17 20 F-0 30609L 26 30 
- CODE 133A Key No. Description REPAIR PARTS MOWER HOUSING SUSPENSION Key No. Part No. Description Part No. 
- CODE 133A REPAIR PARTS MOWER HOUSING 7 3 1 9 63 4 8 10 11 5 2 12 6 30 32 31 29 34 24 6 13 7 14 6 9 16 9 29 26 27 6 35 63 8 28 29 36 29 38 9 9 17 17 18 18 18 37 6 6 15 39 34 9 8 64 10 23 40 45 11 16 43 22 21 13 12 49 50 48 45 45 51 47 52 42 52 53 54 42 50 6 45 62 51 56 57 55 58 59 60 61 F-0 30609L 28 20 19 
- CODE 133A Key No. REPAIR PARTS MOWER HOUSING Description Part No. 1 Belt, Blade Drive 37x111 2 Pulley, Input 3 Key No. Description Part No. 
- CODE 133A REPAIR PARTS ELECTRICAL SYSTEM 4 1 5 9 2 8 6 2 7 3 F-0 30609L 30 3 
- CODE 133A REPAIR PARTS ELECTRICAL SYSTEM Key No. Description Part No. 
- F-0 30609L 32 
- D EG-Konformitätserklärung entsprechend der Richtlinie 98/37/EG entsprechend der Richtlinie 89/336/EWG entsprechend der Richtlinie 2000/14/EG GB EC Certificate of Conformity conforming to Directive 98/37/EC conforming to Directive 89/336/EEC conforming to Directive 2000/14/EC F Déclaration de conformité pour la CEE conforme à la directive 98/37/CE conforme à la directive 89/336/CEE conforme à la directive 2000/14/CE I Certificato di conformita’ comunitario conforme alla Direttiva 98/37/CE conforme all 
- Wir / We / Nous / Noi / Nosotros / Wij / Nós / Vi / Vi / Vi / Me erklären in alleiniger Verantwortung, daß das Produkt declare in sole responsibility, that the product déclarons sous notre seule responsabilité que le produit dichiariamo sotto la nostra piena responsabilità che il prodotto declaramos bajo responsabilidad propia que el producto verklaren enig in verantwoording, dat het produkt declaramos com responsabilidade própria que o produto intygar med ensamansvar att nedanstående produkt erklærer som 
- Bauart Category Categorie Categoria Categoría Categorie Categoria Kategori Kategori Kategori Kategoria RASENTRAKTOR LAWNMOWER TONDEUSE A GAZON TORSAERBA CORTADORA DE CESPED GRASMAAIMACHINE CORTADOR DE GRAMA GRÄSKLIPPARE GRESSKLIPPER GRÆSSLÅMASKINE RUOHONLEIKKURI Fabrikmarke / Make / Marque / Marca / Marca / Merk / Marca /Fabriksmärke / Merke / Mærke / Merkki MURRAY Typ / Type / Type / Tipo / Tipo / Model / Tipo / Typ / Type / Type / Tyyppi 10 HP / 30 Garantierter Schalleistungspegel Guaranteed sound p 
- Name und Adresse der in der Europäischen Gemeinschaft etablierten benannten Stelle für Richtlinie 2000/14/EG Name and address of the notified body established in the European Community for Directive 2000/14/EC Nom et adresse de l’organisme notifié établi dans la Communauté européenne pour la directive 2000/14/CE Nome e indirizzo dell’organismo notificato stabilito nella Comunità Europea per Direttiva 2000/14/CE SNCH 11, Route de Luxembourg L - 5230 Sandweiler Nombre y dirección del organismo notificado es