User Manual

Page5
WiringandInstallation
WARNINGTURNOFFPOWERTOTIMERBOXFIRST.Failingto
turnoffpowerbeforeremovingyourcurrentboardcanresultinelectrocutionordeath.


ThingsYouWillNeedForInstallation:
● MainAquaRitePCBoard
● 5/16”socket


1. MakesurepowerisOFF.
2. Unplugthecellcordandtheflowswitchfromthecontrolbox.
3. Usinga5/16“socket,removethetwoscrewsthatsecurethecoverpaneltotheAqua
Ritecontrolbox.
4. PullthecoverpaneloutoftheAquaRitecontrolbox.
5. PulltheDisplayPCBoardoffoftheMainPCB.TheDisplayPCBoardshouldliftrightoff
themainPCBoardeasily.
6. Removethepowercablesfromtheboard.
7. Removethegray,violet,white,blue,orange,andyellowcablesfromtheMainPCBoard.
Werecommendusingapairofneedlenosepliers.
8. Removetheredandblackcablesfromtheupperrightcornerofthecontrolbox.
9. TherearetwoscrewsthatholdtheMainPCBoardinplace.Removethetwoscrews
usinga5/16”socket.
10. SlidetheoldMainPCBoardoutofthecontrolbox.
11. PlacethenewPureLineMainPCBoard(GLXPCBRITE)intothecontrolbox.(Angled
whitetabsatthebottomoftheboard)
12. Tightenthetwoscrewsattheboardusingthe5/16”socket.
13. Attachtheredandblackcablesfromthebackterminaltotheboard.
14. Attachthegray,violet,white,BLACK,orange,andyellowcablestotheboard.The
terminalsontheboardarelabeledwithaspecificcolor.Eachcoloredcableshouldbe
matchedtothecolorindicatedontheboard.NOTE:TheBLACKcableattachestothe
BLUEterminal.Thatistheonlydifferenceinwirecolors.
15. Connecttheorangeandyellowcables.(Locatedintheupperleftside,asopposedto
therightside)



INYOPOOLS.COM
8773726038