User's Manual

Shut-off on Implausible Control Commands
The automatic shut-off will activate after a sequence of multiple questionable movement commands. If,
for example, one or more joysticks on the transmitter are actuated successively in different directions in
an irregular manner, the system switches off automatically.
This function protects the operator and the whole work environment from potential dangers as well as
the machine from wear resulting from rapid and erratic movements.
After an automatic switch-off you must reactivate the transmitter as described in chapter Operation.
Micro Drive
With the micro drive function the speed of the machine is limited to a preselected level. Even at full
movement of the joystick/linear lever, the operator can not exceed this speed limit. In this manner
demanding drive maneuvers can be managed and inexperienced users can be protected from potential
dangers that can result from “speeding”.
Orthogonal Drive (Electronic Cross Gate)
With the orthogonal drive function dangerous situations, caused by unintentional diagonal movements
are being prevented. The operator will have to return the joystick back to zero position before another
directional command can be activated. This function is suitable for example for situations where the
operator has to make precision commands in confined areas. Diagonal movements are not possible.
User identification
The "user identification" function with the HBC Smart Card enables a simple personalization of the radio
system as well as the storage of all user profiles in the radio system. Safety relevant functions can be
released to authorized personnel only and unauthorized users can be protected of potentially dangerous
situations. In addition the radio system stores user-related all operating processes as well as the
respective on time of the radio system. This data can be read from the radio system and shows how long
the machine was in use and how the individual operators used the various functions of the radio system.