User's Manual

Catch-Release
Via the Catch-Release option two or more transmitters can control a
machine alternately.
When the receiver is switched on, the machine can initially be
controlled via any associated transmitter. Once the receiver was taken
over by one transmitter, the other transmitters no longer have access.
Take over machine
1. Switch the transmitter on.
2. Enter the "Catch" command on the transmitter and actuate the
start button.
The access rights for the machine remain with that transmitter until the
"Release" command is issued by that transmitter.
Release machine
1. Enter the "Release" command on the transmitter.
2. Switch the transmitter off.
The access rights for the machine are cancelled. Machine control can be taken over by another
transmitter.
Operating Example:
Transmitter 1 has taken over the machine. Transmitter 2 is to be given control.
1. Enter the "Release" command on transmitter 1.
2. Switch transmitter 1 off.
3. Switch transmitter 2 on.
4. Enter the "Catch" command on transmitter 2 and actuate the start button.
Transmitter 2 now has sole access to all machine functions.
Notes:
 If a receiver has already been adopted by a transmitter can be displayed via a lamp on the
machine.
 If the operating voltage of the receiver fails, the receiver returns to the starting condition in
which it can be adopted by any transmitter. If necessary, the receiver must be adopted anew.
 If the transmitter is deactivated without the command "Release" having been issued, the other
transmitters have no access to the receiver. The starting condition described above can only
be resumed by deactivating the operating voltage at the receiver.