User's Manual

Caution:
Before starting work always trigger the acoustic signal. This warns all colleagues that the machine
is about to move.
Deactivating the Transmitter
Press the STOP switch.
Note:
Replace the battery when the status LED in the transmitter flashes red, an acoustic signal sounds
and the transmitter vibrates (option). Otherwise, the transmitter will switch off in a few minutes.
Recharge the empty battery in the respective charger.
Automatic Switch-OFF (APO Function)
For safety reasons we have equipped the transmitter with an automatic switch-OFF (APO function).
The transmitter is automatically put out of circuit after approx. 15 minutes of non-use.
The automatic switch-OFF also saves battery power.
After an automatic switch-OFF you must reactivate the transmitter as described in chapter Operation.
Caution:
The automatic switch-OFF does not relieve the operator of his responsibility to turn off the
transmitter with the STOP switch when not in use.