User's Manual

Options
The availability of the following functions depends on the design and configuration of your radio control
system.
Safety Features
radiomatic
®
shock-off / roll-detect / zero-g / inclination switch
The safety features enable a quick shut-down of the radio control in specific emergency situations.
Therefore, these intelligent functions prevent a dangerous unintended command from being given to the
crane or machine.
radiomatic
®
shock-off can trigger a quick automatic shut-down of the radio control in
case of an impact to the transmitter – e. g. if the transmitter is being hit by a massive
object thereby getting out of control.
radiomatic
®
roll-detect can automatically detect rolling of the transmitter and, in this
case, initiate a quick shut-down of the radio control.
radiomatic
®
zero-g can automatically detect if the transmitter is dropped or being
thrown to another user. In such cases, zero-g can trigger a quick automatic shut-down
of the transmitter.
inclination switch can deactivate the transmitter, if it exceeds an inclination angle of
approx. 130° – 170° for a certain time and/or if it is placed front side down.
When the transmitter was shut down with radiomatic
®
shock-off/roll-detect/zero-g or
inclination switch, the start button has to be activated until the status LED flashes
green. Then the transmitter is ready to operate again.
The safety features do not relieve the operator of his responsibility to turn off
the transmitter with the STOP switch when not in use.