User's Manual

Operating Instructions
Radio Transmitter PM NTU
Page 10 / 16 BE-PM_NTU-US-L.DOC [ Word 97 ] FL
HBC-radiomatic, Inc. , Cincinnati , Ohio 45242 , USA
2000-08-16 Information and specifications subject to change without notice.
Radio Control System
3.2 Special Operating Modes (Optional)
This chapter describes special operating modes that are not available with all crane systems.
If your radio telecontrol system is not equipped with the features described, you may ignore the
following and continue with the next chapter.
3.2.1 Scanner
With the option scanner, the transmitter and the receiver are equipped with 4 radio frequencies each
(refer to wiring diagrams).
If the radio channel used is currently occupied by another operator, another radio channel may be
selected via a rotary switch. The scanner in the receiver will automatically follow the transmitter to
the radio frequency selected.
After switching ON the transmitter (STOP switch unlocked ; confer to chapter 3) or after a
frequency change during operation, it will last only a short time until the receiver has "followed"
the transmitter to the frequency selected.