User's Manual

Operating Instructions
Radio Transmitter PM NTU
BE-PM_NTU-US-L.DOC [ Word 97 ] FL Page 11 / 16
HBC-radiomatic, Inc. , Cincinnati , Ohio 45242 , USA
Information and specifications subject to change without notice. 2000-08-16
Radio Control System
3.2.2 tele-teach-in Battery (TTB 10)
The PM NTU radio control – together with the FSE 735 and FSE 770
radio receivers – features the so-called tele-teach-in option. This
specific function allows you to input and store the minimum as well
as maximum speeds assigned to the individual joystick functions in a
simple manner.
The tele-teach-in option is available for all proportional functions
(joystick commands).
Important note !
Your radio control system was already adapted to your specific
crane by a retailer respectively the manufacturer.
Should the crane movements nevertheless be executed in a jerky
manner or too fast, then please contact your retailer or the
manufacturer in order to have the settings adapted.
In the following, the programming of the minimum and maximum
speeds of the individual control functions will be described by means
of tele-teach-in.
The programming keys ("+" and "–") are located on the tele-teach-in
battery (confer fig. right).
Note :
Please read the instructions at hand completely and carefully
before beginning with the programming !
File: TTB10.CDR [ CorelDraw 8.0 ] 11.08.2000 FL
– 6V + + 6V –
Ni-Cd Cd