Instructions / Assembly

Time and temperature display

Setting key

1. Single-click mirror touch operation, real-time display of time and temperature, simple

and practical;

2. Special customized digital tube display, convenient and flexible design of mirror laser

marking, more beautiful effect;

3. The automatic detection function of temperature sensor can intermittently display the

current room temperature by connecting the matching sensor, which is convenient for selection;

4. One-click to complete all settings, support 12/24 hour system switching,

Celsius/Fahrenheit switching;

5. In the night mode, the display brightness will be automatically reduced between 22:00-

06:00 at night to reduce dazzling discomfort at night.

1. Display of time and temperature

The normal working state is that the time is displayed for 10 seconds, the temperature is

displayed for 2 seconds, and the two are displayed alternately; When the time is displayed, press the

button once to display the temperature immediately, and the alternate display will automatically

resume after two seconds;

2. Function setting

Press and hold the touch key for 3 seconds to enter the setting mode. The Screen displays “24H”

and flashes. At this time, you can briefly press the setting key to switch the 24-hour system or the 12-

hour system;

Press and hold again until the hour position displayed on the screen flashes. At this time, press

and hold briefly to adjust the hour incrementally; Press and hold again until the minute bit displayed

on the screen flashes. At this time, press and hold briefly to adjust the minute incrementally;

Press and hold again until the screen displays ℃ or ℉ and flashes. At this time, press and hold

briefly to switch the temperature unit (℃/℉).

After all the options are set, the system will automatically exit the setting mode and return to the

normal standby state if there is no operation for more than 3 seconds.

3. Night mode

The display brightness will be automatically reduced during the 22:00-06:00 period. During this

period, if there is a key operation, the normal brightness will be automatically restored. If there is no

key operation for more than 10 seconds, the display will automatically turn to the low brightness

display state.