User's Manual

23
. ★
PC hardware screen introduction.
1. first open the Android board wifi hot spots, then connect the screen
transmitter to the Android card USB interface for matching registration,
after successful registration will pop up the following interface:
Note: open the hot spot before matching and then connect the screen to match.
3. Connect the registered screen transmitter to the computer USB
port. When the display interface prompts "shareable ", press the screen
transmitter to see the corresponding sharing screen on the conference
tablet.
4. When the screen transmitter is successfully connected to the whole machine, a circular
green button will appear in the upper left corner, and the number displayed represents
the number of screens connected to the whole machine.Click expand display host mode,
repeatedly click on the device in the screen down screen or click on the connected device
to start the screen, as shown below:
In the process of screen transmission, after checking and locking, the computer screen of other users will
not be able to preempt the user screen being transmitted
Screen
cast