User Manual

ENGLISH
Page | 14
same SD card in different cameras to avoid possible file system
conflicts.
9. Color or brightness is different between pictures at same
time of day and during burst mode
 Camera has sophisticated light metering calculations to
optimize pictures in all settings; light intensity may change
between pictures causing differences in color and contrast.
 During burst mode, the first picture is taken quickly for fast
trigger speed; increased light metering occurs between first and
second picture resulting in different color or brightness.
10. Battery level on display is low despite using new batteries
 Ensure battery type is selected correctly in camera menu.
 Rechargeable batteries run on lower voltage than lithium
resulting in display variation. Some rechargeable batteries will
display low power even though they are fully charged. This does
not affect camera performance.
 Cold weather will reduce battery output.
11. Low Power problems
When the camera power is low the system will not be stable.
You may observe abnormal screen displays or automatic camera
reboot. Change your batteries.
12. Camera fails to detect motion.
 Ensure batteries test full. Please replace batteries if necessary.
 Ensure SD card is NOT locked and compatible with camera.
Please take test pictures in “Live Preview” mode.
 Ensure “Quiet Time” is set correctly.
 Ensure camera is mounted correctly. Note: hot weather,
humidity, and rain will reduce PIR sensing distance. Please
move camera closer if required.
 Typically mounting the camera at a height of 3 feet will
maximize detection distance. This will depend slightly on the
size of game you are trying to observe.
 Camera may be pointed up too high or down thereby allowing
game to walk under or over the PIR motion detection window.
Please adjust camera position and try again.