Operation Manual

English

3. If a WEP/WPA key (password) is required, the radio will ask you to input the WEP/WPA

code and display the password entry screen as follows:

• Turn SELECT to cycle through the alphanumeric character list, press SELECT to

select an appointed character.

Note: WEP/WPA pass codes are case-sensitive.

• If the wrong character is input while entering your password, select ‘ ’ to delete

that character.

Note:

a. = Backspace.

b. the method of select , or : while the cursor is pointing to ‘0 ’, Turn

SELECT counter-clockwise and select , then continue to turn counter-clockwise and

select or in turn.

c. Selecting will return to the previous track.

d. The radio will automatically save the WEP/WPA you’ve input, so you do not need to re-enter

these codes.

e. After selecting the nal character of your password, turn SELECT to , press SELECT to

conrm.

4. Press the SELECT knob to exit. The setting is OK now!