Operation Manual

21
English
Dressy
Step3 – Access Network
Continue the steps above, a few seconds later, it will be displayed:
* If it fails to connect to the network, please do the following:
a. Check your Router to see if it is working normally or not.
b. Check your LAN cable to make sure it hasn’t been damaged,
c. Make sure the port of the cable is securely inserted into the LAN socket.
1. Refer to previous page ‘choose LAN setting’ steps 1-4, turn SELECT to < Wireless >,
press SELECT.
2. While the cursor is pointing to < DHCP enable >, press SELECT to conrm, and then
step by step to access the wireless network.
Now, the wireless setting is OK!
1.11 Shift to Wireless Network