Operation Manual

35
English
Dressy
To check the alarm status, press to enter standby mode.
• Turn Alarm o
When the alarm sounds, press to turn it o, or
• Play Snooze Function
Press SNOOZE to postpone it for 5 minutes, repeatedly press to prolong snooze to
other user-dened snooze time.
Note: a. While in SNOOZE function, the relative alarm should be blinking, and shows how long it will last, during this time,
you also can press to stop snooze, and press again to have your radio play.
b. After reached the SNOOZE time, it should sound again.
• To cancel the Alarm
Refer to steps1-2 above, set ‘Alarm Enable status’ to ‘ O  ’, and then turn SELECT to ‘ S a v e ’, press SELECT to conrm, your
radio will save your settings and show ‘Alarm saved’.
7.5 Equaliser
Note: Several preset EQ modes are available; also a user-dened setting through ‘My EQ prole setup’
1. These settings can be reached by pressing MENU to < Main menu >→ < System settings >→ < Equaliser >, press SELECT to
conrm.
2. You can then choose from a variety of preset modes or create your own through My EQ prole setup, then follow
your radio’s demonstration to adjust relative bass, treble and loudness settings:
Turn SELECT to the one you want, take set ‘My EQ prole setup’ as example:
a. Press SELECT to conrm ‘My EQ prole setup’.
b. Press SELECT to conrm Bass, turn SELECT to adjust, and then press SELECT to conrm.
c. Setting Treble accordingly.
d. Finally turn SELECT to ‘Loudness’, press SELECT to shift it from o to on, or vice versa, shift from on to o.