Operation Manual

10
English
b. If you nd the wrong character has being input, press BACK to return to that character.
c. After the input is done, when the cursor points to , press the Scroll knob to try accessing
the Internet.
It should now successfully connect to your network.
Note: a. WEP/WPA pass codes are case-sensitive.
b. Radio will automatically save the WEP/WPA code, therefore, there is no need to re-enter unless you
perform a <Reset to Default>.
Or, if it fails to access, please do the following:
A. Check your Router, see if it is working normally or not.
B. Relocating your radio to a stronger signal position is highly recommended!
C. Make sure your password is input correctly.
Shift to Wired Network
Step 1 – Choose LAN Setting
Note: make sure the LAN cable is already connected to the LAN socket.
• To enter the LAN Setting, press MENU → < Conguration > → < Network > → < Manual Conguration >
→ < Wired >→ < DHCP (On) > → Connecting to Network…, after that, it will say connected.